Rear Center Seat Outer Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) Removal


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY LH

  2. REMOVE REAR SEAT UPPER RECLINING COVER LH

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

  4. REMOVE CENTER SEAT HINGE COVER RH

  5. REMOVE REAR SEAT CUSHION MOULDING LH

  6. REMOVE REAR SEATBACK LOCK STRIKER COVER LH

  7. REMOVE SEAT CUSHION COVER WITH PAD

  8. REMOVE CENTER SEATBACK ASSEMBLY

  9. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

  10. REMOVE RECLINING ADJUSTER KNOB CAP LH

  11. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH

  12. REMOVE SEAT BELT ANCHOR COVER CAP

  13. REMOVE REAR SEAT SHOULDER BELT COVER

  14. REMOVE REAR SEATBACK COVER

  15. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH

  16. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

  17. REMOVE SEATBACK COVER WITH PAD

  18. REMOVE REAR SEAT SHOULDER BELT GUIDE

  19. REMOVE NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH

Rear Center Seat Outer Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) -- Removal


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE REAR NO. 1 SEAT ASSEMBLY LH

  1. Remove the rear No. 1 seat assembly LH (LandCruiser RM00000468A00VX.html).



2. REMOVE REAR SEAT UPPER RECLINING COVER LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat Belt.Seat Belt Warning System.Rear Center Seat Outer Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) Removal

  1. Using a screwdriver, detach the 3 claws and remove the rear seat upper reclining cover LH.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


3. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 3 screws and reclining adjuster release handle LH.



4. REMOVE CENTER SEAT HINGE COVER RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a clip remover, remove the clip.

  1. Detach the 2 guides and remove the center seat hinge cover LH.



5. REMOVE REAR SEAT CUSHION MOULDING LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a clip remover, detach the clip.

  1. Using a moulding remover, detach the 3 claws.

  1. Move the rear seat cushion moulding LH in the direction of the arrow to detach the guide and remove the rear seat cushion moulding LH.



6. REMOVE REAR SEATBACK LOCK STRIKER COVER LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a clip remover, detach the 3 clips and remove the rear seatback lock striker cover LH.



7. REMOVE SEAT CUSHION COVER WITH PAD


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. w/ Seat Heater System:

    1. Disconnect the 2 rear seat heater connectors.



      2. Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    2. Pull out the wire harness as shown in the illustration.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the hooks.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the hook and remove the seat cushion cover with pad.



8. REMOVE CENTER SEATBACK ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 bolts and center seatback assembly.



9. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the bolt and inner belt, and disconnect the 3 point type belt anchor.



10. REMOVE RECLINING ADJUSTER KNOB CAP LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat Belt.Seat Belt Warning System.Rear Center Seat Outer Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) Removal

  1. Using a screwdriver, detach the claw and guide, and then remove the reclining adjuster knob cap LH.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


11. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 screws.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat Belt.Seat Belt Warning System.Rear Center Seat Outer Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) Removal

  1. Disconnect the cable in the order shown in the illustration and remove the rear seat lock control lever sub-assembly LH.



12. REMOVE SEAT BELT ANCHOR COVER CAP


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat Belt.Seat Belt Warning System.Rear Center Seat Outer Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) Removal

  1. Using a screwdriver, detach the 2 claws and remove the seat belt anchor cover cap.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


13. REMOVE REAR SEAT SHOULDER BELT COVER

  1. Disconnect the outer belt from the rear seat shoulder belt cover.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 2 claws and 2 guides, and then remove the rear seat shoulder belt cover.



14. REMOVE REAR SEATBACK COVER


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a screwdriver, detach the 4 claws and remove the rear seatback cover.

    HINT:
    Tape the screwdriver tip before use.


15. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a clip remover, detach the 7 clips and remove the rear seatback board carpet assembly LH.



16. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 4 claws and remove the 2 rear No. 1 seat headrest support assemblies.



17. REMOVE SEATBACK COVER WITH PAD


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat Belt.Seat Belt Warning System.Rear Center Seat Outer Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) Removal

  1. Remove the 10 hog rings and detach the hooks, and then remove the seatback cover with pad.

    Text in Illustration
    *1
    		Hook
    *2
    		Hog Ring


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the outer belt from the seatback cover with pad.



  1. w/ Seat Heater System:



      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    1. Remove the wire harness.



18. REMOVE REAR SEAT SHOULDER BELT GUIDE


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the claw and guide, and then remove the rear seat shoulder belt guide.



19. REMOVE NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the nut and bolt, and then detach the 2 claws and remove the seat belt.