Rear No. 1 Seat Inner Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) Removal


  1. REMOVE REAR SEAT ASSEMBLY LH

  2. REMOVE REAR SEAT UPPER RECLINING COVER LH

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

  4. REMOVE CENTER SEAT HINGE COVER LH

  5. REMOVE REAR SEAT CUSHION MOULDING LH

  6. REMOVE REAR SEATBACK LOCK STRIKER COVER LH

  7. REMOVE SEAT CUSHION COVER WITH PAD

  8. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

Rear No. 1 Seat Inner Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) -- Removal


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE REAR SEAT ASSEMBLY LH

  1. Remove the rear seat assembly LH (LandCruiser RM00000468A00VX.html).



2. REMOVE REAR SEAT UPPER RECLINING COVER LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat Belt.Seat Belt Warning System.Rear No. 1 Seat Inner Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) Removal

  1. Using a screwdriver, detach the 3 claws and remove the rear seat upper reclining cover LH.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


3. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 3 screws and reclining adjuster release handle LH.



4. REMOVE CENTER SEAT HINGE COVER LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a clip remover, remove the clip.

  1. Detach the 2 guides and remove the center seat hinge cover LH.



5. REMOVE REAR SEAT CUSHION MOULDING LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a clip remover, detach the clip.

  1. Using a moulding remover, detach the 3 claws.

  1. Move the rear seat cushion moulding LH in the direction of the arrow to detach the guide and remove the rear seat cushion moulding LH.



6. REMOVE REAR SEATBACK LOCK STRIKER COVER LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a clip remover, detach the 3 clips and remove the rear seatback lock striker cover LH.



7. REMOVE SEAT CUSHION COVER WITH PAD


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. w/ Seat Heater System:

    1. Disconnect the 2 rear seat heater connectors.



      2. Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    2. Pull out the wire harness as shown in the illustration.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the hooks.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the hook and remove the seat cushion cover with pad.



8. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the bolt and inner belt and disconnect the 3 point type belt anchor.