Front Seat Cushion Heater (For Manual Seat) Removal
REMOVE FRONT SEAT ASSEMBLY
REMOVE RECLINING ADJUSTER RELEASE HANDLE LH
REMOVE VERTICAL ADJUSTING HANDLE LH (for Driver Side)
REMOVE FRONT SEAT CUSHION SHIELD LH
REMOVE FRONT SEAT INNER CUSHION SHIELD LH
REMOVE FRONT SEAT INNER CUSHION SHIELD RH (for Front Passenger Side)
REMOVE FRONT SEAT INNER BELT ASSEMBLY LH
REMOVE SEAT CUSHION COVER WITH PAD
REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH
Front Seat Cushion Heater (For Manual Seat) -- Removal |
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
1. REMOVE FRONT SEAT ASSEMBLY |
Remove the front seat assembly (LandCruiser RM00000465Y00YX.html).
2. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH |
Raise the reclining adjuster release handle to reveal the claw. Using a screwdriver, detach the claw and remove the handle.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration*1
| Protective Tape
|
3. REMOVE VERTICAL ADJUSTING HANDLE LH (for Driver Side) |
Remove the screw and handle.
4. REMOVE FRONT SEAT CUSHION SHIELD LH |
Remove the screw.
Using a moulding remover, detach the 4 claws and clip, and then remove the cushion shield.
for Driver Side:
Detach the 5 wire harness clamps and disconnect the 2 connectors.
5. REMOVE FRONT SEAT INNER CUSHION SHIELD LH |
Using a moulding remover, detach the 3 claws and remove the cushion shield.
6. REMOVE FRONT SEAT INNER CUSHION SHIELD RH (for Front Passenger Side) |
Using a moulding remover, detach the 4 claws and remove the cushion shield.
7. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH |
for Driver Side:
(LandCruiser RM000003RQO025X_01_0006.html)
for Front Passenger Side:
(LandCruiser RM000003RQO025X_01_0001.html)
8. REMOVE SEAT CUSHION COVER WITH PAD |
Remove the rubber band from the seat cushion spring.
Disconnect the seat heater connector and detach the wire harness clamp.
w/ Front Seat Side Airbag:
Detach the fastening tape and open the cover.
Text in Illustration*1
| Fastening Tape
|
Disconnect the airbag wire harness.
for Clip Type:
Using a moulding remover, remove the 2 clips.
for Hook Type:
Detach the 2 hooks.
Disconnect the seat heater connector and detach the 3 wire harness clamps.
Detach the hooks.
for Front Passenger Side:
Detach the claw and disconnect the connector.
Remove the seat cushion cover with pad.
9. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER |
Type A:
Remove the hog rings and disconnect the straps.
Type B:
Cut off the tack pins and disconnect the straps.
Text in Illustration*1
| Tack Pin
|
Remove the hog rings and seat cushion cover from the seat cushion pad.
10. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH |
Cut off the tack pins and remove the front seat cushion heater from the front seat cushion cover.
Text in Illustration*1
| Tack Pin
|