Clearance Warning Ecu (For Lhd) -- Installation |
- HINT:
- A bolt without a torque specification is shown in the standard bolt chart (LandCruiser RM00000118W0G8X.html).
| 1. INSTALL CLEARANCE WARNING ECU ASSEMBLY (for 4 Sensor Type) |
Install the clearance warning ECU assembly with the bolt.
Connect the connector.
| 2. INSTALL CLEARANCE WARNING ECU ASSEMBLY (for 8 Sensor Type) |
Install the clearance warning ECU assembly with the 2 nuts.
Connect the connector.
| 3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY |
 |
Connect each connector.
Attach the 5 clips and claw to install the glove compartment door.
Install the 2 bolts <C> and 2 screws <A> or <B>.
Text in Illustration *1 Bolt *2 Screw
| 4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
Attach the 3 clips and 2 guides to install the No. 2 instrument panel under cover.
Install the screw.
Text in Illustration *A for LHD *B for RHD
| 5. INSTALL INSTRUMENT PANEL ORNAMENT |
Attach the 5 clips to install the instrument panel ornament.
| 6. INSTALL INSTRUMENT SIDE PANEL RH |
Connect the connector.
Attach the 5 clips, claw and 3 guides to install the instrument side panel.
| 7. INSTALL COWL SIDE TRIM BOARD RH |
Attach the clip and claw to install the cowl side trim board RH.
Install the clip.
| 8. INSTALL DOOR SCUFF PLATE ASSEMBLY RH |
Attach the 4 clips, 10 claws and 2 guides to install the door scuff plate assembly RH.
| 9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).
| 10. CHECK SRS WARNING LIGHT |