Front Seat Side Airbag Assembly Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FRONT SEAT HEADREST ASSEMBLY

  3. REMOVE FRONT SEAT INNER TRACK BRACKET COVER LH

  4. REMOVE FRONT SEAT OUTER TRACK BRACKET COVER LH

  5. REMOVE INNER SEAT TRACK BRACKET COVER LH

  6. REMOVE SEAT TRACK COVER LH

  7. REMOVE FRONT SEAT INNER TRACK BRACKET COVER RH (for Walk in Seat Type)

  8. REMOVE FRONT SEAT OUTER TRACK BRACKET COVER RH (for Walk in Seat Type)

  9. REMOVE INNER SEAT TRACK BRACKET COVER RH (for Walk in Seat Type)

  10. REMOVE SEAT TRACK COVER RH (for Walk in Seat Type)

  11. REMOVE FRONT SEAT ASSEMBLY

  12. DISCONNECT FRONT SEAT SIDE AIRBAG ASSEMBLY

  13. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

  14. REMOVE FRONT SEAT SIDE AIRBAG ASSEMBLY

Front Seat Side Airbag Assembly -- Removal


CAUTION:
  1. Be sure to read Precaution thoroughly before servicing (LandCruiser RM000000KT10NVX.html).
  2. Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.
  3. If the side airbag was deployed, replace the front seat side airbag assembly, separate type front seatback spring assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.
    for Manual Seat: (LandCruiser RM00000465Z018X.html)
    for Power Seat: (LandCruiser RM000004673017X.html)
    for Walk in Seat Type: (LandCruiser RM0000046B900AX.html)
HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.
  3. Use the same procedure for the RH and LH sides.
  4. The procedure listed below is for the LH side. (for Manual Seat, Power Seat)
  5. The procedure listed below is for the RH side. (for Walk in Seat Type)


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. (LandCruiser RM000003YMD00TX.html)
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


2. REMOVE FRONT SEAT HEADREST ASSEMBLY
for Manual Seat: (LandCruiser RM00000465Y00YX_02_0006.html)
for Power Seat: (LandCruiser RM00000467200XX_01_0001.html)
for Walk in Seat Type: (LandCruiser RM0000046B800AX_01_0007.html)


3. REMOVE FRONT SEAT INNER TRACK BRACKET COVER LH
for Manual Seat: (LandCruiser RM00000465Y00YX_02_0001.html)
for Power Seat: (LandCruiser RM00000467200XX_01_0002.html)


4. REMOVE FRONT SEAT OUTER TRACK BRACKET COVER LH
for Manual Seat: (LandCruiser RM00000465Y00YX_02_0002.html)
for Power Seat: (LandCruiser RM00000467200XX_01_0003.html)


5. REMOVE INNER SEAT TRACK BRACKET COVER LH
for Manual Seat: (LandCruiser RM00000465Y00YX_02_0003.html)
for Power Seat: (LandCruiser RM00000467200XX_01_0004.html)


6. REMOVE SEAT TRACK COVER LH
for Manual Seat: (LandCruiser RM00000465Y00YX_02_0004.html)
for Power Seat: (LandCruiser RM00000467200XX_01_0005.html)


7. REMOVE FRONT SEAT INNER TRACK BRACKET COVER RH (for Walk in Seat Type)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Operate the seat track adjusting handle to move the seat to the rearmost position.

  1. Using a moulding remover, detach the 2 claws and remove the cover.



8. REMOVE FRONT SEAT OUTER TRACK BRACKET COVER RH (for Walk in Seat Type)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a moulding remover, detach the 2 claws.

  1. Move the cover in the direction of the arrow to detach the guide and remove the cover.



9. REMOVE INNER SEAT TRACK BRACKET COVER RH (for Walk in Seat Type)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Operate the seat track adjusting handle to move the seat to the foremost position.

  1. Using a moulding remover, detach the 2 claws.

  1. Move the cover in the direction of the arrow to detach the 2 guides and remove the cover.



10. REMOVE SEAT TRACK COVER RH (for Walk in Seat Type)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a moulding remover, detach the 2 claws.

  1. Move the cover in the direction of the arrow to detach the 2 guides and remove the cover.



11. REMOVE FRONT SEAT ASSEMBLY
for Manual Seat: (LandCruiser RM00000465Y00YX.html)
for Power Seat: (LandCruiser RM00000467200XX.html)
for Walk in Seat Type: (LandCruiser RM0000046B800AX.html)


12. DISCONNECT FRONT SEAT SIDE AIRBAG ASSEMBLY


  1. for Manual Seat, Power Seat:



      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    1. Remove the rubber band from the seat cushion spring.



      2. Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Supplemental Restraint Systems.Airbag System.Front Seat Side Airbag Assembly Removal

    2. Detach the claw and disconnect the airbag connector.

      Text in Illustration
      *1
      		Fastening Tape

    3. Detach the 3 airbag wire harness clamps.

    4. Detach the fastening tape and open the cover.

    5. Disconnect the airbag wire harness.



  1. for Walk in Seat Type:



      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    1. Remove the rubber band from the seat cushion spring.



      2. Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Supplemental Restraint Systems.Airbag System.Front Seat Side Airbag Assembly Removal

    2. Detach the claw and disconnect the airbag connector.

      Text in Illustration
      *1
      		Fastening Tape

    3. Detach the 4 airbag wire harness clamps.

    4. Detach the fastening tape and open the cover.

    5. Disconnect the airbag wire harness.



13. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
HINT:
Use the same procedure for the RH and LH sides.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. w/ Seat Heater System:
    Disconnect the seat heater connector and detach the wire harness clamp.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 3 hog rings.



  1. Open the 2 fasteners, and then open the front seatback cover.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Supplemental Restraint Systems.Airbag System.Front Seat Side Airbag Assembly Removal


    Text in Illustration
    *A
    		for Cloth Seat
    		*B
    		for Leather Seat


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the nut and front seatback cover bracket.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a screwdriver, detach the 4 claws to remove the 2 front seat headrest supports.

  1. Remove the separate type seatback cover with pad.



14. REMOVE FRONT SEAT SIDE AIRBAG ASSEMBLY
CAUTION:
When storing the front seat side airbag assembly, keep the airbag deployment side facing upward.
HINT:
Use the same procedure for the RH and LH sides.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 2 clamps.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 nuts and front seat side airbag assembly.

    CAUTION:
    1. The nuts must not be reused.
    2. Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.