Power Seat Switch (For Rear Lh) Inspection
INSPECT NO. 2 FOLD SEAT SWITCH ASSEMBLY (for Rear LH)
Power Seat Switch (For Rear Lh) -- Inspection |
| 1. INSPECT NO. 2 FOLD SEAT SWITCH ASSEMBLY (for Rear LH) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Switch Condition
| Specified Condition
|
3 (RTRN(L)) - 7 (E)
| RETURN LH switch pressed
| Below 1 Ω
|
8 (FOLD(L)) - 7 (E)
| FOLD LH switch pressed
|
1 (RTRN(R)) - 7 (E)
| RETURN RH switch pressed
|
6 (FOLD(R)) - 7 (E)
| FOLD RH switch pressed
|
If the result is not as specified, replace the No. 2 fold seat switch assembly.
Text in Illustration*1
| RETURN LH Switch
|
*2
| FOLD LH Switch
|
*3
| RETURN RH Switch
|
*4
| FOLD RH Switch
|
*a
| Component without harness connected
(No. 2 Fold Seat Switch Assembly)
|
Apply battery voltage to the switch connector and check that the fold seat switch illuminates.
- OK:
Measurement Condition
| Specified Condition
|
Battery positive (+) → 5 (+B)
Battery negative (-) → 7 (E)
| Illumination illuminates
|
If the result is not as specified, replace the No. 2 fold seat switch assembly.
Text in Illustration*a
| Component without harness connected
(No. 2 Fold Seat Switch Assembly)
|
