Personal Light (For Rear Door) Removal


  1. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH

  2. REMOVE FRONT DOOR ARMREST COVER LH

  3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

  4. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP LH

  5. REMOVE REAR DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH

  6. REMOVE NO. 2 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY

Personal Light (For Rear Door) -- Removal


HINT:
  1. Use the same procedure for LHD and RHD vehicles.
  2. The procedure listed below is for LHD vehicles.
  3. Use the same procedure for the RH side and LH side.
  4. The procedure listed below is for the LH side.


1. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using moulding remover A, detach the 3 claws and remove the rear door inside handle bezel as shown in the illustration.



2. REMOVE FRONT DOOR ARMREST COVER LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using moulding remover A, detach the 8 claws and remove the assist grip cover.



3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 3 screws.

  1. Using a clip remover, detach the 9 clips.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Pull out the rear door trim board sub-assembly in the direction indicated by the arrow in the illustration.

  1. Raise the rear door trim board sub-assembly to detach the 4 claws and remove the rear door trim board sub-assembly together with the rear door inner glass weatherstrip.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the rear door lock remote control cable assembly and rear door inside locking cable assembly as shown in the illustration.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Lighting (Int).Lighting System.Personal Light (For Rear Door) Removal

  1. Disconnect each connector.

    Text in Illustration
    *A
    		for 14 Speakers
    *B
    		for 9 Speakers


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a screwdriver, detach the claw and remove the clamp.



4. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a screwdriver, detach the 3 claws and remove the rear door inner glass weatherstrip from the rear door trim board sub-assembly as shown in the illustration.



5. REMOVE REAR DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Lighting (Int).Lighting System.Personal Light (For Rear Door) Removal

  1. Disconnect the connector.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a screwdriver, detach the claw and remove the light.

    HINT:
    Tape the screwdriver tip before use.


6. REMOVE NO. 2 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the connector.

  1. Detach the clamp.

  1. Turn the light in the direction indicated by the arrow and remove it.