Power Seat Switch (For Rear No. 2 Seat) Inspection
INSPECT REAR POWER SEAT SWITCH (for LH Side)
INSPECT REAR POWER SEAT SWITCH (for RH Side)
INSPECT NO. 1 FOLD SEAT SWITCH ASSEMBLY
Power Seat Switch (For Rear No. 2 Seat) -- Inspection |
| 1. INSPECT REAR POWER SEAT SWITCH (for LH Side) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Switch Condition
| Specified Condition
|
4 (FWD) - 6 (E)
| UP switch pressed
| Below 1 Ω
|
5 (BACK) - 6 (E)
| DOWN switch pressed
|
If the result is not as specified, replace the rear power seat switch assembly.
Text in Illustration*1
| UP Switch
|
*2
| DOWN Switch
|
*a
| Component without harness connected
(Rear Power Seat Switch Assembly)
|
Apply battery voltage to the switch connector and check that the power seat switch illuminates.
- OK:
Measurement Condition
| Specified Condition
|
Battery positive (+) → 7 (ILL+)
Battery negative (-) → 2 (ILL-)
| Illumination illuminates
|
If the result is not as specified, replace the rear power seat switch assembly.
Text in Illustration*a
| Component without harness connected
(Rear Power Seat Switch Assembly)
|
| 2. INSPECT REAR POWER SEAT SWITCH (for RH Side) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Switch Condition
| Specified Condition
|
4 (FWD) - 6 (E)
| UP switch pressed
| Below 1 Ω
|
5 (BACK) - 6 (E)
| DOWN switch pressed
|
If the result is not as specified, replace the rear power seat switch assembly.
Text in Illustration*1
| UP Switch
|
*2
| DOWN Switch
|
*a
| Component without harness connected
(Rear Power Seat Switch Assembly)
|
Apply battery voltage to the switch connector and check that the power seat switch illuminates.
- OK:
Measurement Condition
| Specified Condition
|
Battery positive (+) → 7 (ILL+)
Battery negative (-) → 2 (ILL-)
| Illumination illuminates
|
If the result is not as specified, replace the rear power seat switch assembly.
Text in Illustration*a
| Component without harness connected
(Rear Power Seat Switch Assembly)
|
| 3. INSPECT NO. 1 FOLD SEAT SWITCH ASSEMBLY |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Switch Condition
| Specified Condition
|
1 (RTNL) - 7 (E)
| RETURN LH switch pressed
| Below 1 Ω
|
6 (FLDL) - 7 (E)
| FOLD LH switch pressed
|
3 (RTNR) - 7 (E)
| RETURN RH switch pressed
|
8 (FLDR) - 7 (E)
| FOLD RH switch pressed
|
If the result is not as specified, replace the No. 1 fold seat switch assembly.
Text in Illustration*1
| RETURN RH Switch
|
*2
| FOLD RH Switch
|
*3
| RETURN LH Switch
|
*4
| FOLD LH Switch
|
*a
| Component without harness connected
(No. 1 Fold Seat Switch Assembly)
|
Apply battery voltage to the switch connector and check that the fold seat switch illuminates.
- OK:
Measurement Condition
| Specified Condition
|
Battery positive (+) → 5 (+B)
Battery negative (-) → 7 (E)
| Illumination illuminates
|
If the result is not as specified, replace the No. 1 fold seat switch assembly.
Text in Illustration*a
| Component without harness connected
(No. 1 Fold Seat Switch Assembly)
|
