Rear No. 2 Seat Assembly (For Manual Seat Type Lh Side) -- Reassembly |
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1. INSTALL NO. 3 SEAT LEG ASSEMBLY LH |
Attach the 4 clips to install the seat cushion under carpet LH to the No. 3 seat leg.
| 2. INSTALL NO. 2 SEAT LEG ASSEMBLY (for RH Side) |
Attach the 4 clips to install the seat cushion under carpet RH to the No. 2 seat leg.
| 3. INSTALL NO. 3 SEATBACK FRAME SUB-ASSEMBLY LH |
Using a T45 "TORX" socket wrench, install the seatback frame with the 4 "TORX" bolts.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
| 4. INSTALL NO. 2 SEAT LOCK CABLE |
Twist the cable end in the direction indicated by the arrow to connect it.
 |
Attach the clamp to install the cable.
Text in Illustration *1 Clamp *2 Cable End
| 5. INSTALL FOLD SEAT LOCK CONTROL CABLE SUB-ASSEMBLY |
Twist the cable end in the direction indicated by the arrow to connect it.
Text in Illustration *1 Clamp A *2 Clamp B *3 Cable Tie *4 Cable End
 |
Attach the 2 clamps labeled A to install the cable.
Install the clamp labeled B together with the No. 2 seat lock cable.
Install 2 new cable ties.
| 6. INSTALL REAR NO. 2 SEAT OUTER RECLINING COVER LH |
Attach the 2 claws and guide to install the cover.
Install the screw.
| 7. INSTALL REAR NO. 2 SEAT INNER RECLINING COVER LH |
Attach the 5 claws to install the cover.
| 8. INSTALL REAR NO. 3 SEAT OUTER RECLINING COVER LH |
Attach the 2 claws and guide to install the cover.
Install the screw.
| 9. INSTALL REAR NO. 3 SEAT INNER RECLINING COVER LH |
Attach the 4 claws to install the cover.
| 10. INSTALL NO. 2 SEATBACK COVER |
Attach the 2 claws to install the cover.
| 11. INSTALL REAR NO. 2 SEATBACK EDGE PROTECTOR |
Install the protector to the seatback pad with new tack pins.
| 12. INSTALL REAR NO. 3 SEATBACK COVER SUB-ASSEMBLY LH |
Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.
Text in Illustration *1 Hog Ring Pliers - HINT:
- Be careful not to damage the cover.
- When installing the hog rings, avoid wrinkling the cover.
 |
| 13. INSTALL SEATBACK COVER WITH PAD |
Attach the hooks to install the seatback cover with pad.
| 14. INSTALL REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY |
Attach the 4 claws to install the 2 headrest supports.
| 15. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY LH |
Attach the 7 clips to install the board.
| 16. INSTALL REAR SEAT LOCK RELEASE LEVER ASSEMBLY |
Twist the 2 cable ends in the direction indicated by the arrow to connect them.
Text in Illustration *1 Cable End *2 No. 2 Seat Lock Cable *3 Fold Seat Lock Control Cable *2 Clamp
 |
Attach the 2 clamps.
Attach the hook.
Install the lever with the 2 screws.
| 17. INSTALL REAR NO. 2 SEATBACK LOCK STRIKER COVER |
Attach the guide and claw to install the cover.
Text in Illustration *1 Guide
 |
| 18. INSTALL ROPE HOOK ASSEMBLY |
Install the rope hook with the bolt.
- Torque:
- 6.0 N*m{61 kgf*cm, 53 in.*lbf}
Attach the 2 claws to close the cover.
| 19. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH |
Twist the cable end in the direction indicated by the arrow to connect it.
Text in Illustration *1 Clamp *2 Cable End *3 Guide
 |
Attach the clamp.
Attach the guide to install the lever.
Install the 2 screws.
| 20. INSTALL REAR NO. 1 SEATBACK LOCK STRIKER COVER |
Attach the guide and claw to install the cover.
Text in Illustration *1 Guide
 |
| 21. INSTALL REAR SEAT LOCK CONTROL CABLE LH |
Twist the cable end in the direction indicated by the arrow to connect it.
Text in Illustration *1 Clamp *2 Cable End
 |
Attach the clamp to install the cable.
| 22. INSTALL REAR SEAT CUSHION INNER HINGE COVER RH |
Attach the guide to install the cover.
Install the clip and screw.
| 23. INSTALL REAR SEAT CUSHION INNER HINGE COVER LH |
Attach the guide to install the cover.
Install the clip and screw.
| 24. INSTALL REAR NO. 3 SEAT LEG COVER LH |
Attach the 2 claws to install the cover.
| 25. INSTALL REAR SEAT LEG COVER LH |
Attach the 5 clips and 3 hooks to install the cover.
Install the clip.
| 26. INSTALL REAR NO. 2 SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH |
Attach the 2 guides.
Install the lever with the screw.
Twist the cable end in the direction indicated by the arrow to connect it.
Text in Illustration *1 Cable End *2 Clamp
 |
Attach the clamp.
| 27. INSTALL 3RD SEAT LINK SUB-ASSEMBLY LH |
Attach the 4 guides and 2 claws to install the link.
Install the 3 clips.
| 28. INSTALL NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY LH |
Using a T40 "TORX" socket wrench, install the seat cushion frame with the 4 "TORX" bolts.
- Torque:
- 25 N*m{255 kgf*cm, 18 ft.*lbf}
Pull out the seat cushion frame.
| 29. INSTALL REAR NO. 2 SEAT CUSHION MOULDING |
Attach the 2 claws to install the moulding.
Install the 2 screws.
| 30. INSTALL REAR SEAT CUSHION INNER EDGE PROTECTOR LH |
Install the protector to the seat cushion pad with new tack pins.
| 31. INSTALL NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY LH |
Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.
Text in Illustration *1 Fastener *2 Hog Ring Pliers - HINT:
- Be careful not to damage the cover.
- When installing the hog rings, avoid wrinkling the cover.
 |
| 32. INSTALL SEAT CUSHION COVER WITH PAD |
Attach the 2 hooks to install the seat cushion cover with pad.
Close the seat cushion cover under part with the 2 clips.
Close the 2 fasteners.
| 33. INSTALL REAR NO. 1 SEAT CUSHION MOULDING |
Attach the 4 guides and 2 claws to install the moulding.
install the 2 clips.
| 34. INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY LH |
Using a T45 "TORX" socket wrench, install the inner belt assembly with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
| 35. INSTALL REAR SEAT LOWER CUSHION HINGE COVER RH |
Attach the guide and 2 claws to install the cover.
Install the 2 screws.
| 36. INSTALL REAR SEAT LOWER CUSHION HINGE COVER LH |
Attach the 3 claws to install the cover.
Install the 2 screws.
| 37. INSTALL CAP |
Install the 2 caps.
| 38. INSTALL REAR SEAT HEADREST ASSEMBLY |
Install the headrest.