Rear No. 2 Seat Assembly (For Manual Seat Type Lh Side) -- Disassembly |
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1. REMOVE REAR SEAT HEADREST ASSEMBLY |
Remove the headrest.
| 2. REMOVE CAP |
Remove the 2 caps.
 |
| 3. REMOVE REAR SEAT LOWER CUSHION HINGE COVER LH |
Remove the 2 screws.
 |
Detach the 3 claws and remove the cover.
| 4. REMOVE REAR SEAT LOWER CUSHION HINGE COVER RH |
Remove the 2 screws.
Text in Illustration *1 Guide
 |
Detach the 2 claws and guide and remove the cover.
| 5. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY LH |
 |
Using a T45 "TORX" socket wrench, remove the bolt and inner belt assembly.
| 6. REMOVE REAR NO. 1 SEAT CUSHION MOULDING |
Using a clip remover, remove the 2 clips.
 |
Detach the 2 claws and 4 guides and remove the moulding.
Text in Illustration *1 Guide
| 7. REMOVE SEAT CUSHION COVER WITH PAD |
Open the 2 fasteners.
Text in Illustration *1 Fastener
 |
Using a clip remover, remove the 2 clips and open the under part of the seat cushion cover.
 |
Detach the 2 hooks and remove the seat cushion cover with pad.
Text in Illustration *1 Hook
 |
| 8. REMOVE NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY LH |
Detach the fastener.
Text in Illustration *1 Fastener
 |
Remove the hog rings and seat cushion cover.
| 9. REMOVE REAR SEAT CUSHION INNER EDGE PROTECTOR LH |
Cut off the tack pins and remove the edge protector from the seat cushion pad.
Text in Illustration *1 Tack Pin
 |
| 10. REMOVE REAR NO. 2 SEAT CUSHION MOULDING |
Remove the 2 screws.
 |
Detach the 2 claws and remove the moulding.
| 11. REMOVE NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY LH |
Operate the rear No. 2 seat lock control lever and retract the seat cushion frame.
Using a T40 "TORX" socket wrench, remove the 4 "TORX" bolts and remove the seat cushion frame.
 |
| 12. REMOVE 3RD SEAT LINK SUB-ASSEMBLY LH |
Remove the 3 clips.
 |
Detach the 2 claws and 4 guides and remove the 3rd seat link.
Text in Illustration *1 Guide
| 13. REMOVE REAR NO. 2 SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH |
Detach the clamp.
Text in Illustration *1 Cable End *2 Clamp
 |
Twist the cable end in the direction indicated by the arrow and disconnect the cable.
Remove the screw.
Text in Illustration *1 Guide
 |
Detach the 2 guides and remove the lever.
| 14. REMOVE REAR SEAT LEG COVER LH |
Remove the clip.
Text in Illustration *1 Hook
 |
Detach the 3 hooks and 5 clips and remove the cover.
| 15. REMOVE REAR NO. 3 SEAT LEG COVER LH |
Detach the 2 claws and remove the cover.
 |
| 16. REMOVE REAR SEAT CUSHION INNER HINGE COVER LH |
Remove the screw and clip.
 |
Detach the guide and remove the cover.
Text in Illustration *1 Guide
| 17. REMOVE REAR SEAT CUSHION INNER HINGE COVER RH |
Remove the screw and clip.
 |
Detach the guide and remove the cover.
Text in Illustration *1 Guide
| 18. REMOVE REAR SEAT LOCK CONTROL CABLE LH |
Detach the clamp.
 |
Twist the cable end in the direction indicated by the arrow and remove the cable.
Text in Illustration *1 Clamp *2 Cable End
| 19. REMOVE REAR NO. 1 SEATBACK LOCK STRIKER COVER |
Using a screwdriver, detach the claw and guide and remove the cover.
Text in Illustration *1 Guide *2 Protective Tape - HINT:
- Tape the screwdriver tip before use.
 |
| 20. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH |
Remove the 2 screws.
 |
Detach the guide and remove the lever.
Detach the clamp.
Twist the cable end in the direction indicated by the arrow and disconnect the cable.
Text in Illustration *1 Clamp *2 Cable End *3 Guide
| 21. REMOVE ROPE HOOK ASSEMBLY |
Using a screwdriver, detach the 2 claws and open the cover.
Text in Illustration *1 Protective Tape - HINT:
- Tape the screwdriver tip before use.
 |
Remove the bolt and rope hook.
 |
| 22. REMOVE REAR NO. 2 SEATBACK LOCK STRIKER COVER |
Using a screwdriver, detach the claw and guide and remove the cover.
Text in Illustration *1 Guide *2 Protective Tape - HINT:
- Tape the screwdriver tip before use.
 |
| 23. REMOVE REAR SEAT LOCK RELEASE LEVER ASSEMBLY |
Remove the 2 screws.
 |
Detach the hook and remove the lever.
Text in Illustration *1 Hook
Detach the 2 clamps.
 |
Twist the 2 cable ends in the direction indicated by the arrow and disconnect the 2 cables.
Text in Illustration *1 Cable End *2 Clamp
| 24. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH |
Detach the 7 clips and remove the board.
 |
| 25. REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY |
Detach the 4 claws and remove the 2 headrest supports.
 |
| 26. REMOVE SEATBACK COVER WITH PAD |
Detach the hooks and remove the seatback cover with pad.
Text in Illustration *1 Hook
 |
| 27. REMOVE REAR NO. 3 SEATBACK COVER SUB-ASSEMBLY LH |
Remove the hog rings and seatback cover.
 |
| 28. REMOVE REAR NO. 2 SEATBACK EDGE PROTECTOR |
Cut off the tack pins and remove the protector from the seatback pad.
Text in Illustration *1 Tack Pin
 |
| 29. REMOVE NO. 2 SEATBACK COVER |
Detach the 2 claws and remove the cover.
 |
| 30. REMOVE REAR NO. 3 SEAT INNER RECLINING COVER LH |
Detach the 4 claws and remove the cover.
 |
| 31. REMOVE REAR NO. 3 SEAT OUTER RECLINING COVER LH |
Remove the screw.
 |
Detach the guide and 2 claws and remove the cover.
Text in Illustration *1 Guide
| 32. REMOVE REAR NO. 2 SEAT INNER RECLINING COVER LH |
Detach the 5 claws and remove the cover.
 |
| 33. REMOVE REAR NO. 2 SEAT OUTER RECLINING COVER LH |
Remove the screw.
 |
Detach the guide and 2 claws and remove the cover.
Text in Illustration *1 Guide
| 34. REMOVE FOLD SEAT LOCK CONTROL CABLE SUB-ASSEMBLY |
Remove the clamp labeled B and detach the 2 labeled clamps A.
 |
Cut off the 2 cable ties.
Twist the cable end in the direction indicated by the arrow and remove the cable.
Text in Illustration *1 Clamp A *2 Clamp B *3 Cable Tie *4 Cable End
| 35. REMOVE NO. 2 SEAT LOCK CABLE |
Detach the clamp.
 |
Twist the cable end in the direction indicated by the arrow and remove the cable.
Text in Illustration *1 Clamp *2 Cable End
| 36. REMOVE NO. 3 SEATBACK FRAME SUB-ASSEMBLY LH |
Using a T45 "TORX" socket wrench, remove the 4 "TORX" bolts and frame.
 |
| 37. REMOVE NO. 3 SEAT LEG ASSEMBLY LH |
Remove the 4 clips and seat cushion under carpet LH from the No. 3 seat leg.
 |
| 38. REMOVE NO. 2 SEAT LEG ASSEMBLY (for RH Side) |
Remove the 4 clips and seat cushion under carpet RH from the No. 2 seat leg.
 |