Power Steering Oil Pressure Switch Removal


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

  2. DRAIN POWER STEERING FLUID

  3. REMOVE POWER STEERING OIL PRESSURE SWITCH

Power Steering Oil Pressure Switch -- Removal



1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 2 front clips of the No. 1 engine cover sub-assembly.

  1. While pulling the No. 1 engine cover sub-assembly towards the front, detach the 2 rear pins, and then remove the No. 1 engine cover sub-assembly.



2. DRAIN POWER STEERING FLUID


3. REMOVE POWER STEERING OIL PRESSURE SWITCH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the power steering oil pressure switch connector.

  1. Using a 19 mm deep socket wrench, remove the power steering oil pressure switch.