Manifold Absolute Pressure Sensor Installation


  1. INSTALL DIESEL TURBO PRESSURE SENSOR

  2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

Manifold Absolute Pressure Sensor -- Installation



1. INSTALL DIESEL TURBO PRESSURE SENSOR


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.1Gd-Ftv Engine Control.Ecd System.Manifold Absolute Pressure Sensor Installation

  1. Connect the vacuum hose to the diesel turbo pressure sensor.

    Text in Illustration
    *1
    		Diesel Turbo Pressure Sensor
    *2
    		No. 3 Water By-pass Pipe Sub-assembly
    *a
    		Vacuum Hose
    *b
    		Protrusion
    *c
    		Paint Mark
    NOTICE:
    Connect the vacuum hose so that the paint mark on the vacuum hose is aligned with the protrusions of the diesel turbo pressure sensor as shown in the illustration.

  1. Install the diesel turbo pressure sensor with the bolt.

    Torque:
    10 N*m{102 kgf*cm, 7 ft.*lbf}
    NOTICE:
    Make sure the protrusion of the No. 3 water bypass pipe sub-assembly is inserted into the hole of the diesel turbo pressure sensor.

  1. Connect the diesel turbo pressure sensor connector.



2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. While pushing the No. 1 engine cover sub-assembly towards the rear, attach the 2 rear pins.

  1. Attach the 2 front clips to install the No. 1 engine cover sub-assembly.