Vehicle Stability Control System (For Hydraulic Brake Booster) Slip Indicator Light Does Not Come On
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
READ VALUE USING INTELLIGENT TESTER (SLIP INDICATOR LIGHT)
VEHICLE STABILITY CONTROL SYSTEM (for Hydraulic Brake Booster) - Slip Indicator Light does not Come ON |
DESCRIPTION
Refer to Slip Indicator Light Remains ON (LandCruiser RM00000451S01HX_01.html).
WIRING DIAGRAM
Refer to Slip Indicator Light Remains ON (LandCruiser RM00000451S01HX_02.html).
INSPECTION PROCEDURE
- NOTICE:
- When replacing the master cylinder solenoid, perform calibration (LandCruiser RM00000452J00ZX.html).
| 1.READ VALUE USING INTELLIGENT TESTER (SLIP INDICATOR LIGHT) |
Turn the ignition switch off.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Chassis / ABS/VSC/TRC / Data List.
ABS/VSC/TRCTester Display
| Measurement Item/Range
| Normal Condition
| Diagnostic Note
|
Slip Indicator Light
| Slip indicator light/ ON or OFF
| ON: Indicator light on
OFF: Indicator light off
| -
|
When performing the Slip Indicator Light Active Test, check Slip Indicator Light in the Data List (LandCruiser RM000001DWY02VX.html).
ABS/VSC/TRCTester Display
| Test Part
| Control Range
| Diagnostic Note
|
Slip Indicator Light
| Slip indicator light
| Indicator light ON/OFF
| Observe the combination meter.
|
ResultResult
| Proceed to
|
Data List Display
| Data List Display when Performing Active Test ON/OFF Operation
|
ON
| Changes between ON and OFF
| A
|
Does not change between ON and OFF (for LHD)
| B
|
Does not change between ON and OFF (for RHD)
| C
|
OFF
| Changes between ON and OFF
| A
|
Does not change between ON and OFF (for LHD)
| B
|
Does not change between ON and OFF (for RHD)
| C
|