Airbag Cut-Off Indicator Light Installation


  1. INSTALL TELLTALE LIGHT ASSEMBLY

  2. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

  3. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  5. CHECK SRS WARNING LIGHT

Airbag Cut-Off Indicator Light -- Installation


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL TELLTALE LIGHT ASSEMBLY

  1. Install the light with the 2 screws.



2. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

  1. Attach the 4 clips to install the instrument panel finish panel end RH.



3. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION
HINT:
Use the same procedure described for the No. 2 instrument panel finish panel cushion.


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


5. CHECK SRS WARNING LIGHT

  1. Check the SRS warning light (LandCruiser RM000000XFD0N3X.html).