Dtc U1000 Can Communication Failure (Message Registry)
DESCRIPTION
INSPECTION PROCEDURE
CHECK DTC OUTPUT
DTC U1000 CAN Communication Failure (Message Registry) |
DESCRIPTION
This DTC is stored when the rear television camera assembly judges that it has an internal CAN malfunction.DTC Code
| DTC Detection Condition
| Trouble Area
|
U1000
| Can communication failure (message registry)
| Rear television camera assembly
|
INSPECTION PROCEDURE
- NOTICE:
- If the cable was disconnected from and reconnected to the negative (-) battery terminal, the estimated course lines may not be displayed on the image of the area behind the vehicle. In this case, perform "Correct the Steering Angle Neutral Point" (LandCruiser RM0000035DE05YX.html).
- Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed (LandCruiser RM0000035DD06QX.html).
Clear the DTCs (LandCruiser RM0000035DB07IX.html).
Check for DTCs and check that no DTCs are output (LandCruiser RM0000035DB07IX.html).
- HINT:
- If the DTC is not output again when rechecking for DTCs, it may have been stored due to a temporary CAN malfunction.
- If DTC U1000 is output frequently, duplicate the problem symptoms and perform the inspection again, even though the DTC is not output when rechecking for DTCs (LandCruiser RM000003YMJ00XX.html).
Result
| Proceed to
|
DTC U1000 is not output
| A
|
DTC U1000 is output (w/ Tire Carrier)
| B
|
DTC U1000 is output (w/o Tire Carrier)
| C
|