Parking Assist Monitor System (For Camera Built-In Ecu) Diagnosis System

In diagnostic mode for the parking assist monitor system, signals received by the navigation receiver assembly*1 or radio and display receiver assembly*2 can be checked and the parking assist monitor system can be calibrated, adjusted and checked using the navigation receiver assembly*1 or radio and display receiver assembly*2.

NOTICE:

Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed (LandCruiser RM0000035DD06QX.html).

HINT:

The displayed items may differ depending on vehicle specifications.

Start diagnostic mode.

1. for Navigation Receiver Type: LandCruiser RM0000011BU0W7X.html
   
2. for Radio and Display Type: LandCruiser RM0000014CZ0EQX.html
   

Select "Function Check/Setting" on the "Service Menu" screen to display the "Function Check/ Setting I" screen.

Select "Vehicle Signal" on the "Function Check/ Setting I" screen.

Vehicle Signal Check Mode

1. When the "Vehicle Signal Check Mode" screen is displayed, check the item displayed for "REV".
   

   1. for Navigation Receiver Type: LandCruiser RM0000011BU0W7X.html
      
   2. for Radio and Display Type: LandCruiser RM0000014CZ0EQX.html
      

   HINT:

   1. Only conditions having inputs are displayed.
      
   2. This screen displays vehicle signals input to the navigation receiver assembly*1 or radio and display receiver assembly*2.
      

Finish diagnostic mode.

1. for Navigation Receiver Type: LandCruiser RM0000011BU0W7X.html
   
2. for Radio and Display Type: LandCruiser RM0000014CZ0EQX.html
   

Start diagnostic mode.

1. for Navigation Receiver Type: LandCruiser RM0000011BU0W7X.html
   
2. for Radio and Display Type: LandCruiser RM0000014CZ0EQX.html
   

1. Select "Function Check/Setting" on the "Service Menu" screen to display the "Function Check/ Setting I" screen.
   





2. Select "Camera Setting" on the "Function Check/Setting I" screen.
   

   HINT:

   After "Camera Setting" is selected, the screen transitions differ depending on whether initialization of the parking assist monitor system was performed after the rear television camera assembly was replaced.

   Parking Assist Monitor System Initialization	Screen Transition
   Not performed	Car Signal Check screen
   Performed	Mode Setting screen





3. When the screen changes to the "Mode Setting" screen, select "Back Camera Setting" to display the "Car Signal Check" screen.
   

   HINT:

   To select a grayed out item, select and hold the item for 2 seconds or more.

Car Signal Check

1. On the "Car Signal Check" screen, it is possible to inspect the state of signals and check the settings.
   
   

   Item	Inspection Detail	Note
   CAN	CAN communication signal input	When "CHK" (red) is displayed, selecting "Next" will not change the screen to the next screen.

   HINT:

   1. When "CHK" (red) is displayed, perform inspections based on the result of the following inspections.
      
   2. If performing the adjustment after proceeding to the next screen, confirm that all items display "OK" (blue) before selecting "Next".
      

CAN inspection

HINT:

If "CHK" (red) is displayed for "CAN", check for DTCs and perform troubleshooting based on the output DTCs (LandCruiser RM0000035DB07IX.html).

Finish diagnostic mode.

1. for Navigation Receiver Type: LandCruiser RM0000011BU0W7X.html
   
2. for Radio and Display Type: LandCruiser RM0000014CZ0EQX.html