Rain Sensor Removal


  1. REMOVE NO. 1 RAIN SENSOR COVER

  2. REMOVE RAIN SENSOR

  3. CLEAN WINDSHIELD GLASS

Rain Sensor -- Removal



1. REMOVE NO. 1 RAIN SENSOR COVER


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 2 claws and remove the rain sensor cover.



2. REMOVE RAIN SENSOR


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the connector.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Wiper Washer.Wiper And Washer System.Rain Sensor Removal

  1. Release the stopper by pulling it down.

    Text in Illustration
    *1
    		Stopper

  1. Remove the rain sensor as shown in the illustration.



3. CLEAN WINDSHIELD GLASS
NOTICE:
  1. The rain sensor tape can be reused, however, replace it with a new piece of tape if it is dirty or damaged.
  2. Check that the rain sensor tape does not remain on the windshield glass. If it does, remove it before installing the rain sensor.