Rain Sensor Installation

Clean the rain sensor sensing portion with a piece of cloth, etc.

Peel off the smaller release sheet, and then attach the rain sensor tape on the rain sensor sensing portion as shown in the illustration.

Standard:

Area	Measurement
A	13.5 mm (0.532 in.)
B	7.5 mm (0.295 in.)

NOTICE:

Use your fingers to push out any air bubbles from under the tape.

Clean the windshield glass with a piece of cloth, etc.

NOTICE:

1. Make sure that there is no rain sensor tape residue remaining on the windshield glass. If there is, remove the residue.
   
2. If there is any rain sensor tape residue remaining on the windshield glass, replace the tape.
   

When installing a new rain sensor or replacing the rain sensor tape:

1. Peel off the release sheet.
   

   HINT:

   Do not touch the silicon coated surfaces.





2. Attach the 2 guides, and then carefully install the rain sensor to the glass surface so that there are no air bubbles from forming between the contact surfaces.
   

   Text in Illustration

   *1	Stopper
   *2	Guide

   NOTICE:

   Do not touch the silicon coated or glass surfaces.

3. Push in the stopper.
   

4. Connect the connector.
   

Attach the 2 claws to install the rain sensor cover.