Oil Level Sensor Removal


  1. REMOVE REAR ENGINE UNDER COVER ASSEMBLY

  2. DRAIN ENGINE OIL

  3. REMOVE ENGINE OIL LEVEL SENSOR

Oil Level Sensor -- Removal



1. REMOVE REAR ENGINE UNDER COVER ASSEMBLY

  1. Remove the 4 bolts and rear engine under cover.



2. DRAIN ENGINE OIL

  1. Remove the oil filler cap.

  1. Remove the oil pan drain plug and gasket, and then drain the engine oil into a container.

  1. Wipe the oil pan and drain plug.

  1. Install a new gasket and the oil pan drain plug.

    Torque:
    34 N*m{347 kgf*cm, 25 ft.*lbf}


3. REMOVE ENGINE OIL LEVEL SENSOR


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the engine oil level sensor connector.

  1. Remove the 4 bolts, engine oil level sensor.

  1. Cut away part of the gasket and remove the gasket from the engine oil level sensor.

    HINT:
    Remove only the outer part of the gasket.