Room Light Switch Inspection


  1. INSPECT ROOM LIGHT SWITCH ASSEMBLY

Room Light Switch -- Inspection



1. INSPECT ROOM LIGHT SWITCH ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Lighting (Int).Lighting System.Room Light Switch Inspection

  1. Measure the voltage according to the value(s) in the table below.

    Standard Voltage:
    Tester Connection
    		Switch Condition
    		Specified Condition
    3 (UP) - 4 (E)
    		Light control switch off
    		10 kΩ or higher
    Light control switch UP
    		Below 1 Ω
    2 (DOWN) - 4 (E)
    		Light control switch off
    		10 kΩ or higher
    Light control switch DOWN
    		Below 1 Ω

  1. Apply battery voltage to the connector and check the LED illumination.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Terminal 5 (ILL+)
    Battery negative (-) → Terminal 1 (E)
    		LED illuminates
    If the result is not as specified, replace the room light switch assembly.
    Text in Illustration
    *a
    		Component without harness connected
    (Room Light Switch)