Toyota Parking Assist-Sensor System (W/O Multi-Display) How To Proceed With Troubleshooting

  1. VEHICLE BROUGHT TO WORKSHOP

  2. INSPECT BATTERY VOLTAGE

  3. PROBLEM SYMPTOMS TABLE

  4. OVERALL ANALYSIS AND TROUBLESHOOTING

  5. ADJUST, REPAIR OR REPLACE

  6. CONFIRMATION TEST

Toyota Parking Assist-Sensor System (W/O Multi-Display) -- How To Proceed With Troubleshooting


HINT:
Use the following procedures to troubleshoot the TOYOTA parking assist-sensor system.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE

    1. Measure the battery voltage with the ignition switch off.

      Standard voltage:
      11 to 14 V
      If the voltage is below 11 V, replace or recharge the battery before proceeding.

    NEXT


    3.PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table (LandCruiser RM000003QOU01DX.html).

      Result
      Result
      		Proceed to
      Fault is not listed in problem symptoms table
      		A
      Fault is listed in problem symptoms table
      		B



    		B.
    Go to step 5
    A


    4.OVERALL ANALYSIS AND TROUBLESHOOTING

    1. Operation Check (LandCruiser RM000003QOH010X.html).

    2. Terminals of ECU (LandCruiser RM000003QOE00RX.html).


    NEXT


    5.ADJUST, REPAIR OR REPLACE

      NEXT


      6.CONFIRMATION TEST

        NEXT

        END