Headlight Dimmer Switch -- Inspection |
| 1. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for LH Side) |
Inspect the light control switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 20 (H) - 12 (E) Light control switch off 10 kΩ or higher 18 (T) - 12 (E) 19 (A) - 12 (E) 19 (A) - 12 (E) Light control switch auto Below 1 Ω 18 (T) - 12 (E) Light control switch tail Below 1 Ω 18 (T) - 12 (E) Light control switch head Below 1 Ω 20 (H) - 12 (E)
 |
Inspect the headlight dimmer switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 11 (HU) - 12 (E) Headlight dimmer switch flash Below 1 Ω 17 (HF) - 12 (E) 11 (HU) - 12 (E) Headlight dimmer switch hi beam Below 1 Ω
- HINT:
- Perform the flash and high beam inspection with the light control switch on head.
Inspect the turn signal switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 13 (TR) - 12 (E) Turn signal switch right turn Below 1 Ω 13 (TR) - 12 (E) Turn signal switch right lane change Below 1 Ω 13 (TR) - 12 (E) Turn signal switch neutral 10 kΩ or higher 15 (TL) - 12 (E) 15 (TL) - 12 (E) Turn signal switch left lane change Below 1 Ω 15 (TL) - 12 (E) Turn signal switch left turn Below 1 Ω
Inspect the fog light switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 4 (BFG) - 3 (LFG) Fog light switch off 10 kΩ or higher 2 (B) - 3 (LFG) 4 (BFG) - 3 (LFG) Front fog light switch on Below 1 Ω 4 (BFG) - 3 (LFG) Rear fog light switch on Below 1 Ω 2 (B) - 3 (LFG)
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
| 2. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for RH Side) |
Inspect the light control switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 11 (H) - 19 (EL) Light control switch off 10 kΩ or higher 13 (T) - 19 (EL) 12 (A) - 19 (EL) 12 (A) - 19 (EL) Light control switch auto Below 1 Ω 13 (T) - 19 (EL) Light control switch tail Below 1 Ω 13 (T) - 19 (EL) Light control switch head Below 1 Ω 11 (H) - 19 (EL)
 |
Inspect the headlight dimmer switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 20 (HU) - 19 (EL) Headlight dimmer switch flash Below 1 Ω 14 (HF) - 19 (EL) 20 (HU) - 19 (EL) Headlight dimmer switch hi beam Below 1 Ω
- HINT:
- Perform the flash and high beam inspection with the light control switch on head.
Inspect the turn signal switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 16 (TR) - 19 (EL) Turn signal switch right turn Below 1 Ω 16 (TR) - 19 (EL) Turn signal switch right lane change Below 1 Ω 16 (TR) - 19 (EL) Turn signal switch neutral 10 kΩ or higher 18 (TL) - 19 (EL) 18 (TL) - 19 (EL) Turn signal switch left lane change Below 1 Ω 18 (TL) - 19 (EL) Turn signal switch left turn Below 1 Ω
Inspect the fog light switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 7 (BFG) - 8 (LFG) Fog light switch off 10 kΩ or higher 9 (B) - 8 (LFG) 7 (BFG) - 8 (LFG) Front fog light switch on Below 1 Ω 7 (BFG) - 8 (LFG) Rear fog light switch on Below 1 Ω 9 (B) - 8 (LFG)
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)