REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)
REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)
Luggage Speaker (For 5 Door) -- Removal |
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1. REMOVE REAR NO. 2 SEAT ASSEMBLY |
for Manual Seat Type:
(LandCruiser RM0000045DB008X.html)
for Power Seat Type:
(LandCruiser RM0000045DG00EX.html)
for Face to Face Seat Type:
(LandCruiser RM0000045DX006X.html)
| 2. REMOVE REAR NO. 1 SEATBACK ASSEMBLY |
for 60/40 Split Double-folding Seat Type LH Side:
(LandCruiser RM00000468P00TX.html)
for 60/40 Split Double-folding Seat Type RH Side:
(LandCruiser RM00000468U00WX.html)
| 3. REMOVE REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat) |
 |
- HINT:
- Use the same procedure for all rear No. 1 floor step covers.
Using a screwdriver, detach the 2 claws and remove the rear No. 1 floor step cover.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1 Protective Tape
| 4. REMOVE QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat) |
 |
Remove the 2 bolts and quarter scuff plate.
| 5. REMOVE REAR DOOR SCUFF PLATE LH |
 |
Put protective tape around the rear door scuff plate.
Using a screwdriver, detach the 3 clips, 6 claws and 2 guides and remove the rear door scuff plate.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1 Protective Tape
| 6. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH |
 |
Remove the rear door opening trim weatherstrip.
| 7. REMOVE OUTER LAP BELT ANCHOR COVER |
 |
- HINT:
- Use the same procedure for the other outer lap belt anchor cover.
Detach the 3 claws and remove the outer lap belt anchor cover.
| 8. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) |
Remove the tonneau cover.
| 9. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat) |
 |
- HINT:
- Use the same procedure for the other front luggage compartment trim cover.
Detach the 4 claws and remove the cap.
Remove the bolt, luggage hold belt striker and front luggage compartment trim cover.
Text in Illustration *1 Luggage Hold Belt Striker
 |
| 10. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat) |
 |
Detach the clip and remove the No. 1 deck board.
| 11. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat) |
 |
Detach the 5 clips and 4 claws and remove the rear floor mat rear support plate.
| 12. REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail) |
 |
Remove the 3 bolts and floor side rail.
| 13. REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail) |
- HINT:
- Use the same procedure described for the LH side.
| 14. REMOVE REAR FLOOR CARPET ASSEMBLY |
Detach the 4 claws and remove the rear floor carpet.
Text in Illustration *A w/o Deck Rail *B w/ Deck Rail *C for Face to Face Seat Type - -
| 15. REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER |
 |
- HINT:
- Use the same procedure for the other rear No. 1 seat outer lap belt anchor cover.
Detach the 3 claws and remove the rear No. 1 seat outer lap belt anchor cover.
| 16. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK |
 |
- HINT:
- Use the same procedure for the other No. 1 luggage compartment trim hook.
Remove the luggage compartment trim hook by turning it clockwise.
| 17. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover) |
 |
- HINT:
- Use the same procedure for the other No. 1 tonneau cover holder cap.
Using a screwdriver, detach the 2 claws and remove the No. 1 tonneau cover holder cap.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1 Protective Tape
| 18. REMOVE FRONT DECK SIDE TRIM COVER RH (w/ Tonneau Cover) |
 |
- HINT:
- Use the same procedure for the other front deck side trim cover.
Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1 Protective Tape
| 19. REMOVE ASSIST GRIP PLUG (w/ Rear No. 2 Seat) |
 |
- HINT:
- Use the same procedure for all assist grip plugs.
Using a screwdriver, detach the 2 claws and remove the assist grip plug.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1 Protective Tape
| 20. REMOVE ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat) |
 |
- HINT:
- Use the same procedure for the other assist grip.
Using a screwdriver, detach the 4 claws and remove the 2 assist grip covers.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1 Protective Tape
Detach the 2 clips and remove the assist grip.
Remove the 2 clips from the vehicle body.
| 21. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH |
w/o Rear No. 2 Seat:
Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.
Detach the 6 claws and 2 guides and disconnect the rear seatback lock control lever base.
Remove the 4 bolts and 2 screws.
Detach the 5 clips and 8 claws.
Pass the rear seatback lock control lever base through the deck trim side panel and remove the deck trim side panel.
w/ Rear No. 2 Seat:
Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.
Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.
Remove the 2 bolts and 2 screws.
Detach the 4 clips and 8 claws and remove the deck trim side panel.
| 22. REMOVE NO. 1 SPEAKER WITH BOX ASSEMBLY |
Disconnect the connector.
 |
Remove the 5 bolts and No. 1 speaker with box assembly.
| 23. REMOVE REAR QUARTER TRIM PANEL ASSEMBLY LH |
 |
w/o Rear No. 2 Seat:
Detach the 7 clips and 2 guides and remove the rear quarter trim panel.
w/ Rear No. 2 Seat:
Detach the 7 clips and 2 guides.
Detach the 4 clips and 2 guides, pass the rear No. 2 seat outer belt floor anchor through the rear quarter trim panel and remove the rear quarter trim panel.
 |
| 24. REMOVE REAR HEADER SPEAKER ASSEMBLY |
Disconnect the connector.
 |
Remove the 2 bolts and rear header speaker assembly.