Name Plate (W/ Pillar Emblem) Installation


  1. INSTALL QUARTER PANEL PLATE

Name Plate (W/ Pillar Emblem) -- Installation


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL QUARTER PANEL PLATE


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Exterior Panels Trim.Front Bumper.Name Plate (W/ Pillar Emblem) Installation
HINT:
When installing the quarter panel plate, heat the vehicle body and quarter panel plate using a heat light.
Standard Heating Temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Quarter Panel Plate
20 to 30°C (68 to 86°F)
NOTICE:
Do not heat the vehicle body or quarter panel plate excessively.

  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new quarter panel plate.

    1. Using a heat light, heat the vehicle body and a new quarter panel plate.

    2. Remove the peeling paper from the face of the quarter panel plate.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. Install the quarter panel plate in the position shown in the illustration.

      HINT:
      Press the quarter panel plate firmly to install it.
      Text in Illustration
      *A
      		for 5 Door
      *B
      		for 3 Door
      *a
      		Reference Values
      *b
      		Imaginary line extending from bottom edge of quarter window glass.