REMOVE CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)
REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY (for Automatic Transmission)
REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY (for Manual Transmission)
Stereo Jack Adapter Assembly -- Removal |
| 1. PRECAUTION |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).
| 3. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY |
Detach the 4 clips.
 |
Disconnect the connector and remove the integration control and panel assembly.
| 4. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION |
 |
Detach the 5 clips and remove the No. 2 instrument panel finish panel cushion.
| 5. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION |
- HINT:
- Use the same procedure described for the No. 2 instrument panel finish panel cushion.
| 6. REMOVE INSTRUMENT PANEL FINISH PANEL END LH |
 |
Detach the 4 clips and remove the instrument panel finish panel end LH.
| 7. REMOVE INSTRUMENT PANEL FINISH PANEL END RH |
 |
Detach the 4 clips and remove the instrument panel finish panel end RH.
| 8. REMOVE FRONT CONSOLE UPPER PANEL GARNISH |
w/o Seat Heater System:
Put protective tape around the front console upper panel garnish.
Text in Illustration *1 Protective Tape Detach the 5 clips and remove the front console upper panel garnish.
Disconnect the connector.
w/o CRAWL:
Put protective tape around the front console upper panel garnish.
Text in Illustration *1 Protective Tape Detach the 5 clips and remove the front console upper panel garnish.
Disconnect each connector.
w/ CRAWL:
Put protective tape around the front console upper panel garnish.
Text in Illustration *1 Protective Tape Detach the 5 clips and remove the front console upper panel garnish.
| 9. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
 |
Move the shifting hole cover downward.
Text in Illustration *1 Shifting Hole Cover
Twist the shift lever knob in the direction indicated by the arrow and remove it.
| 10. REMOVE CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) |
 |
Put protective tape around the console panel.
Text in Illustration *1 Protective Tape
Using a moulding remover, detach the 8 clips and 2 claws.
Disconnect each connector and remove the console panel.
| 11. REMOVE CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) |
 |
Put protective tape around the console panel.
Text in Illustration *1 Protective Tape
Using a moulding remover, detach the 8 clips and 2 claws.
Disconnect each connector and remove the console panel.
| 12. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY (for Automatic Transmission) |
Detach the 2 claws and remove the stereo jack adapter.
 |
| 13. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY (for Manual Transmission) |
Detach the 2 claws and remove the stereo jack adapter.
 |
| 14. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY |
 |
Detach the 4 clips and 4 claws.
Disconnect each connector and remove the rear console end panel.
| 15. REMOVE VIDEO (VIDEO ADAPTER) TERMINAL |
Disconnect the connector.
 |
Detach the clamp and 4 claws and remove the video terminal.
| 16. REMOVE HEADPHONE TERMINAL |
Disconnect the 2 connectors.
 |
Detach the 4 claws and 2 clamps and remove the 2 headphone terminals.