Relay (For Windshield Deicer) On-Vehicle Inspection


  1. REMOVE DEICER RELAY

  2. INSPECT DEICER RELAY

  3. INSTALL DEICER RELAY

Relay (For Windshield Deicer) -- On-Vehicle Inspection



1. REMOVE DEICER RELAY

  1. Remove the deicer relay from the engine room relay block.



2. INSPECT DEICER RELAY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Window Glass.Power Window Control System.Relay (For Windshield Deicer) On-Vehicle Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    3 - 5
    		Battery voltage not applied to terminals 1 and 2
    		10 kΩ or higher
    3 - 5
    		Battery voltage applied to terminals 1 and 2
    		Below 1 Ω
    If the result is not as specified, replace the relay.


3. INSTALL DEICER RELAY

  1. Install the deicer relay to the engine room relay block.