Oil Level Sensor -- Removal |
| 1. REMOVE FRONT BUMPER COVER LOWER |
Remove the clip, 5 bolts and front bumper cover lower.
| 2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY |
Remove the 4 bolts.
Unhook the engine under cover from the vehicle body as shown in the illustration.
 |
| 3. REMOVE REAR ENGINE UNDER COVER ASSEMBLY |
Remove the 4 bolts and rear engine under cover.
| 4. DRAIN ENGINE OIL |
Remove the oil filler cap.
Remove the oil pan drain plug and drain the engine oil into a container.
Install a new gasket and the oil pan drain plug.
- Torque:
- 40 N*m{408 kgf*cm, 30 ft.*lbf}
| 5. REMOVE ENGINE OIL LEVEL SENSOR |
Disconnect the connector.
Remove the 4 bolts and sensor.
 |
Cut away part of the gasket and remove the gasket from the engine oil level sensor.
- HINT:
- Remove only the outer part of the gasket.