Steering Column Assembly (For Power Tilt And Power Telescopic Steering Column) Reassembly


  1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU

  2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY

Steering Column Assembly (For Power Tilt And Power Telescopic Steering Column) -- Reassembly



1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU

  1. Install the ECU with the bolt.

    Torque:
    2.8 N*m{28 kgf*cm, 24 in.*lbf}

  1. Connect the connector.

    NOTICE:
    The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.


2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY
HINT:
When replacing the steering lock actuator assembly, refer to the Service Bulletin.

  1. Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Tighten the 2 tapered-head bolt until the bolt heads breaks off.