Network Gateway Ecu Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE DOOR SCUFF PLATE ASSEMBLY RH

  3. REMOVE COWL SIDE TRIM BOARD RH

  4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  5. REMOVE INSTRUMENT SIDE PANEL RH

  6. REMOVE INSTRUMENT PANEL ORNAMENT

  7. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

  8. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY

  9. REMOVE ECU INTEGRATION BOX RH

  10. REMOVE NETWORK GATEWAY ECU

Network Gateway Ecu -- Removal


HINT:
  1. Use the same procedure for LHD and RHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


2. REMOVE DOOR SCUFF PLATE ASSEMBLY RH
HINT:
Use the same procedure described for the LH side.
for 5 Door: (LandCruiser RM0000046JL02NX_01_0002.html)
for 3 Door: (LandCruiser RM0000046JQ00WX_02_0002.html)


3. REMOVE COWL SIDE TRIM BOARD RH
HINT:
Use the same procedure described for the LH side.
for 5 Door: (LandCruiser RM0000046JL02NX_01_0004.html)
for 3 Door: (LandCruiser RM0000046JQ00WX_02_0004.html)


4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  1. Remove the screw.



  1. Detach the 3 clips and 2 guides and remove the No. 2 instrument panel under cover.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Networking.Lin Communication System.Network Gateway Ecu Removal


    Text in Illustration
    *A
    		for LHD
    		*B
    		for RHD


5. REMOVE INSTRUMENT SIDE PANEL RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Networking.Lin Communication System.Network Gateway Ecu Removal

  1. Put protective tape around the instrument side panel.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 5 clips, claw, and 3 guides.

  1. Disconnect the connector and remove the instrument side panel.



6. REMOVE INSTRUMENT PANEL ORNAMENT

  1. Attach the 5 clips to install the instrument panel ornament.



7. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Networking.Lin Communication System.Network Gateway Ecu Removal

  1. Remove the 2 bolts <C> and 2 screws <A> or <B>.

    Text in Illustration
    *1
    		Bolt
    *2
    		Screw

  1. Detach the 5 clips and claw.

  1. Disconnect each connector and remove the glove compartment door.



8. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the screw.

  1. Detach the 2 claws and remove the No. 2 air duct sub-assembly.



9. REMOVE ECU INTEGRATION BOX RH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the connectors.

  1. Detach the harness clamp.

  1. Remove the 2 nuts, bolt and ECU integration box RH.



10. REMOVE NETWORK GATEWAY ECU


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 2 claws and remove the network gateway ECU from the ECU integration box RH.