Network Gateway Ecu Installation


  1. INSTALL NETWORK GATEWAY ECU

  2. INSTALL ECU INTEGRATION BOX RH

  3. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY

  4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

  5. INSTALL INSTRUMENT PANEL ORNAMENT

  6. INSTALL INSTRUMENT SIDE PANEL RH

  7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  8. INSTALL COWL SIDE TRIM BOARD RH

  9. INSTALL DOOR SCUFF PLATE ASSEMBLY RH

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Network Gateway Ecu -- Installation


HINT:
  1. A bolt without a torque specification is shown in the standard bolt chart (LandCruiser RM00000118W0G8X.html).
  2. Use the same procedure for LHD and RHD vehicles.
  3. The procedure listed below is for LHD vehicles.


1. INSTALL NETWORK GATEWAY ECU

  1. Attach the 2 claws to install the network gateway ECU to the ECU integration box RH.



2. INSTALL ECU INTEGRATION BOX RH

  1. Install the ECU integration box RH with the 2 nuts and bolt.

  1. Attach the harness clamp.

  1. Connect the connectors.

    NOTICE:
    1. Do not twist the connectors of ECU when connecting them.
    2. Do not apply more force than necessary to the connectors. If more than 98 N (10 kgf, 22 lbf) of force is applied to a connector, the connector or connector holder may be damaged.


3. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY

  1. Attach the 2 claws to install the No. 2 air duct sub-assembly.

  1. Install the screw.



4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Networking.Lin Communication System.Network Gateway Ecu Installation

  1. Connect each connector.

  1. Attach the 5 clips and claw to install the glove compartment door.

  1. Install the 2 bolts <C> and 2 screws <A> or <B>.

    Text in Illustration
    *1
    		Bolt
    *2
    		Screw


5. INSTALL INSTRUMENT PANEL ORNAMENT

  1. Attach the 5 clips to install the instrument panel ornament.



6. INSTALL INSTRUMENT SIDE PANEL RH

  1. Connect the connector.

  1. Attach the 5 clips, claw and 3 guides to install the instrument side panel.



7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  1. Attach the 3 clips and 2 guides to install the No. 2 instrument panel under cover.



  1. Install the screw.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Networking.Lin Communication System.Network Gateway Ecu Installation


    Text in Illustration
    *A
    		for LHD
    		*B
    		for RHD


8. INSTALL COWL SIDE TRIM BOARD RH
HINT:
Use the same procedure described for the LH side.
for 5 Door: (LandCruiser RM0000046JJ02NX_02_0076.html)
for 3 Door: (LandCruiser RM0000046JO00WX_01_0055.html)


9. INSTALL DOOR SCUFF PLATE ASSEMBLY RH
HINT:
Use the same procedure described for the LH side.
for 5 Door: (LandCruiser RM0000046JJ02NX_02_0078.html)
for 3 Door: (LandCruiser RM0000046JO00WX_01_0057.html)


10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).