INSTALL REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)
INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)
Rear Blower Motor -- Installation |
| 1. INSTALL REAR BLOWER WITH FAN MOTOR SUB-ASSEMBLY |
Install the rear blower with fan motor with the 3 screws.
| 2. INSTALL HEATER BRACKET |
Install the bracket with the 3 screws and attach the clamp.
Connect the 2 connectors
| 3. INSTALL REAR QUARTER TRIM PANEL ASSEMBLY RH |
- HINT:
- Use the same procedure described for the LH side.
| 4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH |
w/o Rear No. 2 Seat:
Connect each connector.
Pass the rear seatback lock control lever base through the deck trim side panel.
Attach the 5 clips and 8 claws to install the deck trim side panel.
Install the 4 bolts and screw.
Attach the 6 claws and 2 guides to install the rear seatback lock control lever base to the deck trim side panel.
Install the rear No. 1 seat outer belt floor anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
w/ Rear No. 2 Seat:
Connect each connector.
Attach the 4 clips and 8 claws to install the deck trim side panel.
Install the 2 bolts and screw.
Install the rear No. 2 seat outer belt floor anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
Install the rear No. 1 seat outer belt floor anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
| 5. INSTALL ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat) |
- HINT:
- Use the same procedure for the other assist grip.
Install the assist grip with the 2 bolts.
| 6. INSTALL ASSIST GRIP PLUG (w/ Rear No. 2 Seat) |
- HINT:
- Use the same procedure for all assist grip plugs.
Attach the 2 claws to install the assist grip plug.
| 7. INSTALL FRONT DECK SIDE TRIM COVER RH (w/ Tonneau Cover) |
- HINT:
- Use the same procedure for the other front deck side trim cover.
Attach the 2 claws to install the front deck side trim cover
| 8. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover) |
- HINT:
- Use the same procedure for the other No. 1 tonneau cover holder cap.
Attach the 2 claws to install the No. 1 tonneau cover holder cap.
| 9. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK |
- HINT:
- Use the same procedure for the other No. 1 luggage compartment trim hook.
Install the No. 1 luggage compartment trim hook by turning it clockwise.
| 10. INSTALL REAR NO. 1 LAP BELT OUTER ANCHOR COVER SEAT |
- HINT:
- Use the same procedure for the other rear No. 1 seat outer lap belt anchor cover.
Attach the 3 claws to install the rear No. 1 seat outer lap belt anchor cover.
| 11. INSTALL REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat) |
Attach the 4 claws to install the rear floor carpet.
Text in Illustration *A w/o Deck Rail *B w/ Deck Rail *C for Face to Face Seat Type - -
| 12. INSTALL FLOOR SIDE RAIL RH (w/ Deck Rail) |
- HINT:
- Use the same procedure described for the LH side.
| 13. INSTALL FLOOR SIDE RAIL LH (w/ Deck Rail) |
Install the floor side rail with the 3 bolts.
| 14. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat) |
Attach the 5 clips and 4 claws to install the rear floor mat rear support plate.
| 15. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat) |
Attach the clip to install the No. 1 deck board.
| 16. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat) |
 |
- HINT:
- Use the same procedure for the other front luggage compartment trim cover.
Install the luggage hold belt striker and front luggage compartment trim cover with the bolt.
Text in Illustration *1 Luggage Hold Belt Striker
Attach the 4 claws to install the cap.
| 17. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) |
Install the tonneau cover.
| 18. INSTALL OUTER LAP BELT ANCHOR COVER |
- HINT:
- Use the same procedure for the other outer lap belt anchor cover.
Attach the 3 claws to install the outer lap belt anchor cover
| 19. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH |
- HINT:
- Use the same procedure described for the LH side.
| 20. INSTALL REAR DOOR SCUFF PLATE RH |
- HINT:
- Use the same procedure described for the LH side.
| 21. INSTALL QUARTER SCUFF PLATE RH (w/ Rear No. 2 Seat) |
- HINT:
- Use the same procedure described for the LH side.
| 22. INSTALL REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat) |
for 60/40 Split Double-folding Seat Type LH Side:
Install the rear No. 1 seatback assembly (LandCruiser RM00000468N00TX.html).
for 60/40 Split Double-folding Seat Type RH Side:
Install the rear No. 1 seatback assembly (LandCruiser RM00000468S00WX.html).
| 23. INSTALL REAR NO. 1 SEATBACK ASSEMBLY |
for 60/40 Split Double-folding Seat Type LH Side:
Install the rear No. 1 seatback assembly (LandCruiser RM00000468N00TX.html).
for 60/40 Split Double-folding Seat Type RH Side:
Install the rear No. 1 seatback assembly (LandCruiser RM00000468S00WX.html).
| 24. INSTALL REAR NO. 2 SEAT ASSEMBLY |
for Manual Seat:
Install the rear No. 2 seat assembly (LandCruiser RM0000045D9008X.html).
for Power Seat:
Install the rear No. 2 seat assembly (LandCruiser RM0000045DE00EX.html).
for Face to Face Seat Type:
Install the rear No. 2 seat assembly (LandCruiser RM0000045DV006X.html).
| 25. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).