Back Door Outside Garnish (W/O Tire Carrier) Installation

Attach the 3 claws and 2 guides to install the No. 2 back door outside garnish.

Pass the back door electrical switch wire harness.

Attach the 19 clips to install the back door outside garnish sub-assembly.

Attach the clamp to install the back door electrical switch wire harness.

Connect the connector.

Install the nut.

w/ Back Door Tire Carrier:

1. Connect the cable.
   

2. Install the back door outside handle with the 2 nuts.
   

   Torque:

   5.0 N*m{51 kgf*cm, 44 in.*lbf}

3. Install the hole plug.
   

   Text in Illustration

   *1

   Hole Plug

w/o Back Door Tire Carrier:

1. Connect the cable.
   

2. Install the back door outside handle with the 2 nuts.
   

   Torque:

   5.0 N*m{51 kgf*cm, 44 in.*lbf}

Apply new butyl tape to the back door panel.

Attach the rear door service hole cover using to the reference points on the rear door panel.

NOTICE:

1. There should be no wrinkles or folds after attaching the service hole cover.
   
2. After attaching the service hole cover, check the seal quality.
   

w/o Back Door Tire Carrier:

1. Attach the 15 clips to install the back door trim panel assembly.
   

2. Install the bolt.
   

w/ Back Door Tire Carrier:

1. Attach the 16 clips to install the back door trim panel assembly.
   

2. Install the bolt.
   

for Face to Face Seat Type:

1. Attach the 15 clips to install the back door trim panel assembly.
   

2. Install the bolt.
   

Install the screw.

Attach the claw to install the cover.

Attach the 6 claws to install the back door lock cover.

Attach the 2 claws to install the tool case.

Attach the 3 claws.

Install the upper tool box panel sub-assembly as shown in the illustration.

Attach the 4 claws.

Install the back door trim cover as shown in the illustration.

Attach the 2 clips and claw to install the back door side garnish.

Attach the 2 clips and claw to install the back door side garnish.

Attach the 4 clips to install the back door center garnish.