Dtc C1Ae3 Front Right Center Sensor
DESCRIPTION
INSPECTION PROCEDURE
CHECK FOR DTC
REPLACE NO. 1 ULTRASONIC SENSOR (FRONT CENTER SENSOR RH)
CHECK FOR DTC
DTC C1AE3 Front Right Center Sensor |
DESCRIPTION
The No. 1 ultrasonic sensor (front center sensor RH) is installed on the front bumper. The ECU detects obstacles based on signals received from the No. 1 ultrasonic sensor (front center sensor RH). If the No. 1 ultrasonic sensor (front center sensor RH) has an open or other malfunction, it will not function normally.DTC Code
| DTC Detection Condition
| Trouble Area
|
C1AE3
| A malfunction of the No. 1 ultrasonic sensor (front center sensor RH).
| - No. 1 ultrasonic sensor (front center sensor RH)
- Clearance warning ECU
|
INSPECTION PROCEDURE
- NOTICE:
- If the DTC is output after repairs, turn the engine switch on (IG) and turn the TOYOTA parking assist-sensor system on. Then clear the DTC (LandCruiser RM000000VKU06EX.html).
Check for DTCs (LandCruiser RM000000VKU06EX.html).
ResultResult
| Proceed to
|
No DTC is output
| A
|
Only DTC C1AE3 is output
| B
|
DTC C1AE3 and C1AEC are output
| C
|
2.REPLACE NO. 1 ULTRASONIC SENSOR (FRONT CENTER SENSOR RH) |
Replace the No. 1 ultrasonic sensor (front center sensor RH) with a normally functioning sensor (LandCruiser RM00000470F01EX.html).
- HINT:
- All of the sensors are interchangeable. To confirm whether a sensor is functioning normally, switch it with a known good sensor from the other end of the vehicle.
Clear the DTCs (LandCruiser RM000000VKU06EX.html).
Check for DTCs (LandCruiser RM000000VKU06EX.html).
ResultResult
| Proceed to
|
No DTC is output
| A
|
DTC C1AE3 is output (for LHD)
| B
|
DTC C1AE3 is output (for RHD)
| C
|
A |
|
|
|
END (NO. 1 ULTRASONIC SENSOR WAS DEFECTIVE) |
|