Electrical Key Oscillator (For Outside Luggage Compartment) Removal


  1. REMOVE JACK BOX HOLE COVER (for 3 Door)

  2. REMOVE BACK DOOR CHECK (for 3 Door)

  3. REMOVE REAR BUMPER BAR PLATE (for 3 Door)

  4. REMOVE REAR NO. 1 BUMPER PLATE (for 3 Door)

  5. REMOVE REAR QUARTER PANEL MUDGUARD LH (for 3 Door)

  6. REMOVE REAR QUARTER PANEL MUDGUARD RH (for 3 Door)

  7. REMOVE REAR BUMPER COVER (for 3 Door)

  8. REMOVE REAR BUMPER SIDE MOUNTING BRACKET LH (for 3 Door)

  9. REMOVE ELECTRICAL KEY ANTENNA (for 3 Door)

  10. REMOVE ELECTRICAL KEY ANTENNA (for 5 Door)

Electrical Key Oscillator (For Outside Luggage Compartment) -- Removal



1. REMOVE JACK BOX HOLE COVER (for 3 Door)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Electrical Key Oscillator (For Outside Luggage Compartment) Removal

  1. Using a screwdriver, detach the 2 claws and remove the jack box hole cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


2. REMOVE BACK DOOR CHECK (for 3 Door)
NOTICE:
  1. If the back door check is detached from a ball joint, do not reuse it as the connection with the ball joint will be loose, resulting in the back door check falling off.
  2. If the back door check is detached from a ball joint, it becomes non-reusable. Therefore, do not detach the back door check from a ball joint unless replacing it.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 bolts.

  1. Using a clip remover, detach the clip and remove the back door check with back door lower damper stay bracket.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the wire harness clamp.

  1. Remove the 3 bolts and back door check with back door lower damper stay bracket.



3. REMOVE REAR BUMPER BAR PLATE (for 3 Door)

  1. Put protective tape around the rear bumper bar plate.



  1. Detach the 14 claws and remove the rear bumper bar plate.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Electrical Key Oscillator (For Outside Luggage Compartment) Removal


    Text in Illustration
    *1
    		Protective Tape
    		-
    		-


4. REMOVE REAR NO. 1 BUMPER PLATE (for 3 Door)

  1. Put protective tape around the No. 1 rear bumper plate.



  1. Detach the 10 claws and 10 guides and remove the No. 1 rear bumper plate.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Electrical Key Oscillator (For Outside Luggage Compartment) Removal


    Text in Illustration
    *1
    		Protective Tape
    		-
    		-


5. REMOVE REAR QUARTER PANEL MUDGUARD LH (for 3 Door)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 clips and 5 screws.

  1. Remove the rear quarter panel mudguard.



6. REMOVE REAR QUARTER PANEL MUDGUARD RH (for 3 Door)
HINT:
Use the same procedure described for the LH side.


7. REMOVE REAR BUMPER COVER (for 3 Door)

  1. Put protective tape around the rear bumper cover.

  1. Remove the 2 clips and 7 bolts.

  1. Detach the 10 claws.

  1. w/ TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:
    Disconnect the 4 connectors.

  1. w/ TOYOTA Parking Assist-sensor System, w/o Rear Fog Light:
    Disconnect the 2 connectors.

  1. w/o TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:
    Disconnect the 2 connectors.



  1. Remove the rear bumper cover.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Electrical Key Oscillator (For Outside Luggage Compartment) Removal


    Text in Illustration
    *1
    		Protective Tape
    		-
    		-


8. REMOVE REAR BUMPER SIDE MOUNTING BRACKET LH (for 3 Door)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. w/ Entry and Start System:
    Disconnect the connector.

  1. Remove the bolt and rear bumper side moulding bracket.



9. REMOVE ELECTRICAL KEY ANTENNA (for 3 Door)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the bolt and antenna.



10. REMOVE ELECTRICAL KEY ANTENNA (for 5 Door)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the connector.

  1. Remove the bolt and antenna.