Security Horn Assembly (W/ Built-In Battery Type) Removal


  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE REAR NO. 2 SEAT ASSEMBLY

  4. REMOVE REAR NO. 1 SEATBACK ASSEMBLY

  5. REMOVE NO. 1 REAR FLOOR STEP COVER (w/ Rear No. 2 Seat)

  6. REMOVE QUARTER SCUFF PLATE INNER RH

  7. REMOVE REAR DOOR SCUFF PLATE RH

  8. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

  9. REMOVE OUTER LAP BELT ANCHOR COVER

  10. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  11. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)

  12. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)

  13. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)

  14. REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)

  15. REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)

  16. REMOVE REAR FLOOR CARPET ASSEMBLY

  17. REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

  18. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

  19. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

  20. REMOVE FRONT DECK SIDE TRIM COVER RH (w/ Tonneau Cover)

  21. REMOVE ASSIST GRIP PLUG (w/ Rear No. 2 Seat)

  22. REMOVE ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)

  23. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

  24. REMOVE REAR SIDE NO. 2 AIR DUCT

  25. REMOVE THEFT WARNING SIREN ASSEMBLY (for 5 Door)

  26. REMOVE REAR SEAT ASSEMBLY (for 3 Door)

  27. REMOVE DOOR SCUFF PLATE ASSEMBLY RH (for 3 Door)

  28. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for 3 Door)

  29. REMOVE TONNEAU COVER ASSEMBLY (for 3 Door)

  30. REMOVE MAT SET PLATE COVER (for 3 Door)

  31. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (for 3 Door)

  32. REMOVE QUARTER TRIM COVER HOLE (for 3 Door)

  33. REMOVE REAR FLOOR CARPET ASSEMBLY (for 3 Door)

  34. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for 3 Door)

  35. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (for 3 Door)

  36. REMOVE FRONT DECK SIDE TRIM COVER (for 3 Door)

  37. REMOVE QUARTER TRIM POCKET TRAY (for 3 Door)

  38. REMOVE OUTER LAP BELT ANCHOR COVER (for 3 Door)

  39. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for 3 Door)

  40. REMOVE THEFT WARNING SIREN ASSEMBLY (for 3 Door)

Security Horn Assembly (W/ Built-In Battery Type) -- Removal



1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


3. REMOVE REAR NO. 2 SEAT ASSEMBLY

  1. for Manual Seat Type:
    (LandCruiser RM0000045DB008X.html)

  1. for Power Seat Type:
    (LandCruiser RM0000045DG00EX.html)

  1. for Face to Face Seat Type:
    (LandCruiser RM0000045DX006X.html)



4. REMOVE REAR NO. 1 SEATBACK ASSEMBLY

  1. for 60/40 Split Double-folding Seat Type LH Side:
    (LandCruiser RM00000468P00TX.html)

  1. for 60/40 Split Double-folding Seat Type RH Side:
    (LandCruiser RM00000468U00WX.html)



5. REMOVE NO. 1 REAR FLOOR STEP COVER (w/ Rear No. 2 Seat)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Security Horn Assembly (W/ Built-In Battery Type) Removal
HINT:
Use the same procedure for all rear No. 1 floor step covers.

  1. Using a screwdriver, detach the 2 claws and remove the rear No. 1 floor step cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


6. REMOVE QUARTER SCUFF PLATE INNER RH
HINT:
Use the same procedure described for the LH side.


7. REMOVE REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedure described for the LH side.


8. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
HINT:
Use the same procedure described for the LH side.


9. REMOVE OUTER LAP BELT ANCHOR COVER


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
HINT:
Use the same procedure for the other outer lap belt anchor cover.

  1. Detach the 3 claws and remove the outer lap belt anchor cover.



10. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  1. Remove the tonneau cover.



11. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
HINT:
Use the same procedure for the other front luggage compartment trim cover.

  1. Detach the 4 claws and remove the cap.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Security Horn Assembly (W/ Built-In Battery Type) Removal

  1. Remove the bolt, luggage hold belt striker and front luggage compartment trim cover.

    Text in Illustration
    *1
    		Luggage Hold Belt Striker


12. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the clip and remove the No. 1 deck board.



13. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 5 clips and 4 claws and remove the rear floor mat rear support plate.



14. REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)
HINT:
Use the same procedure described for the LH side.


15. REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 3 bolts and floor side rail.



16. REMOVE REAR FLOOR CARPET ASSEMBLY


  1. Detach the 4 claws and remove the rear floor carpet.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Security Horn Assembly (W/ Built-In Battery Type) Removal


    Text in Illustration
    *A
    		w/o Deck Rail
    		*B
    		w/ Deck Rail
    *C
    		for Face to Face Seat Type
    		-
    		-


17. REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
HINT:
Use the same procedure for the other rear No. 1 seat outer lap belt anchor cover.

  1. Detach the 3 claws and remove the rear No. 1 seat outer lap belt anchor cover.



18. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
HINT:
Use the same procedure for the other No. 1 luggage compartment trim hook.

  1. Remove the luggage compartment trim hook by turning it clockwise.



19. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Security Horn Assembly (W/ Built-In Battery Type) Removal
HINT:
Use the same procedure for the other No. 1 tonneau cover holder cap.

  1. Using a screwdriver, detach the 2 claws and remove the No. 1 tonneau cover holder cap.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


20. REMOVE FRONT DECK SIDE TRIM COVER RH (w/ Tonneau Cover)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Security Horn Assembly (W/ Built-In Battery Type) Removal
HINT:
Use the same procedure for the other front deck side trim cover.

  1. Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


21. REMOVE ASSIST GRIP PLUG (w/ Rear No. 2 Seat)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Security Horn Assembly (W/ Built-In Battery Type) Removal
HINT:
Use the same procedure for all assist grip plugs.

  1. Using a screwdriver, detach the 2 claws and remove the assist grip plug.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


22. REMOVE ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
HINT:
Use the same procedure for the other assist grip.

  1. Remove the 2 bolts and assist grip.



23. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH


  1. w/o Rear No. 2 Seat:



      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    1. Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.



      2. Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    2. Detach the 6 claws and 2 guides and disconnect the rear seatback lock control lever base.

    3. Remove the 4 bolts and screws.

    4. Detach the 5 clips and 8 claws.

    5. Disconnect each connector.



    6. Pass the rear seatback lock control lever base through the deck trim side panel and remove the deck trim side panel.


      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Security Horn Assembly (W/ Built-In Battery Type) Removal



  1. w/ Rear No. 2 Seat:



      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    1. Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.



      2. Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    2. Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.

    3. Remove the 2 bolts and screw.

    4. Detach the 4 clips and 8 claws.



    5. Disconnect each connector and remove the deck trim side panel.


      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Security Horn Assembly (W/ Built-In Battery Type) Removal



24. REMOVE REAR SIDE NO. 2 AIR DUCT


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 2 clips.

  1. Detach the clamp and remove the duct.



25. REMOVE THEFT WARNING SIREN ASSEMBLY (for 5 Door)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 bolts.

  1. Detach the claw and remove the guide.

  1. Disconnect the connector and remove the theft warning siren assembly.



26. REMOVE REAR SEAT ASSEMBLY (for 3 Door)

  1. for 60/40 Split Tumble Seat Type LH Side:
    (LandCruiser RM0000046ZI006X.html)

  1. for 60/40 Split Tumble Seat Type RH Side:
    (LandCruiser RM0000046ZN006X.html)



27. REMOVE DOOR SCUFF PLATE ASSEMBLY RH (for 3 Door)
HINT:
Use the same procedure described for the LH side.


28. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for 3 Door)
HINT:
Use the same procedure described for the LH side.


29. REMOVE TONNEAU COVER ASSEMBLY (for 3 Door)

  1. Remove the tonneau cover.



30. REMOVE MAT SET PLATE COVER (for 3 Door)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Security Horn Assembly (W/ Built-In Battery Type) Removal
HINT:
Use the same procedure for all mat set plate covers.

  1. Using a screwdriver, detach the 2 claws and remove the mat set plate cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective tape


31. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (for 3 Door)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 5 screws.

  1. Detach the 6 claws and remove the rear floor mat rear support plate.



32. REMOVE QUARTER TRIM COVER HOLE (for 3 Door)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 2 claws and 2 guides and remove the quarter trim cover hole.



33. REMOVE REAR FLOOR CARPET ASSEMBLY (for 3 Door)

  1. Install the rear floor carpet.



34. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for 3 Door)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
HINT:
Use the same procedure for the other No. 1 luggage compartment trim hook.

  1. Remove the luggage compartment trim hook by turning it clockwise.



35. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (for 3 Door)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Security Horn Assembly (W/ Built-In Battery Type) Removal
HINT:
Use the same procedure for the other tonneau cover holder cap.

  1. Using a screwdriver, detach the 2 claws and remove the tonneau cover holder cap.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective tape


36. REMOVE FRONT DECK SIDE TRIM COVER (for 3 Door)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Security Horn Assembly (W/ Built-In Battery Type) Removal
HINT:
Use the same procedure for the other front deck side trim cover.

  1. Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective tape


37. REMOVE QUARTER TRIM POCKET TRAY (for 3 Door)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Security Horn Assembly (W/ Built-In Battery Type) Removal

  1. Put protective tape around the quarter trim pocket tray.

  1. Using a screwdriver, detach the 6 claws and 2 guides, and remove the quarter trim pocket tray.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective tape


38. REMOVE OUTER LAP BELT ANCHOR COVER (for 3 Door)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
HINT:
Use the same procedure for the other outer lap belt anchor cover.

  1. Detach the 3 claws and remove the outer lap belt anchor cover.



39. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for 3 Door)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the bolt and disconnect the front seat outer belt floor anchor.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

  1. Remove the 3 bolts and 2 screws.

  1. Detach the 9 claws and 12 clips.



  1. Disconnect the connector and remove the deck trim side panel.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Security Horn Assembly (W/ Built-In Battery Type) Removal



40. REMOVE THEFT WARNING SIREN ASSEMBLY (for 3 Door)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 bolts.

  1. Detach the claw and remove the guide.

  1. Disconnect the connector and remove the theft warning siren assembly.