Wireless Door Lock Control System (W/ Entry And Start System) Data List / Active Test

  1. READ DATA LIST

  1. ACTIVE TEST

Wireless Door Lock Control System (W/ Entry And Start System) -- Data List / Active Test



READ DATA LIST
HINT:
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body / Data List.

  5. According to the display on the intelligent tester, read the Data List.

    Main Body
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    RR Door Courtesy SW*1
    		Rear RH side door courtesy light switch signal / ON or OFF
    		ON: Rear RH side door open
    OFF: Rear RH side door closed
    		-
    RL Door Courtesy SW*1
    		Rear LH side door courtesy light switch signal / ON or OFF
    		ON: Rear LH side door open
    OFF: Rear LH side door closed
    		-
    Back Door Courtesy SW
    		Back door courtesy light switch signal / ON or OFF
    		ON: Back door open
    OFF: Back door closed
    		-
    Back Door Lock Pos SW
    		Back door lock position switch status / ON or OFF
    		ON: Back door unlocked
    OFF: Back door locked
    		-
    Glass Hatch Courtesy Switch*2
    		Glass hatch courtesy switch signal / ON or OFF
    		ON: Glass hatch open
    OFF: Glass hatch closed
    		-
    FR Door Lock Pos
    		Front RH side door lock position switch signal / UNLOCK or LOCK
    		UNLOCK: Front RH side door unlocked
    LOCK: Front RH side door locked
    		-
    FR Door Courtesy
    		Front RH side door courtesy light switch signal / ON or OFF
    		ON: Front RH side door closed
    OFF: Front RH side door open
    		-
    FL Door Lock Pos
    		Front LH side door lock position switch signal / UNLOCK or LOCK
    		UNLOCK: Front LH side door unlocked
    LOCK: Front LH side door locked
    		-
    FL Door Courtesy
    		Front LH side door courtesy light switch signal / ON or OFF
    		ON: Front LH side door closed
    OFF: Front LH side door open
    		-
    RR-Door Lock Pos SW*1
    		Rear RH side door lock position switch signal / ON or OFF
    		ON: Rear RH side door unlocked
    OFF: Rear RH side door locked
    		-
    RL-Door Lock Pos SW*1
    		Rear LH side door lock position switch signal / ON or OFF
    		ON: Rear LH side door unlocked
    OFF: Rear LH side door locked
    		-

    1. *1: for 5 Door
    2. *2: w/ Glass Hatch Opener System

ACTIVE TEST
HINT:
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body / Active Test.

  5. According to the display on the intelligent tester, perform the Active Test.

    Main Body
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Hazard
    		Turn signal flasher relay
    		ON/OFF
    		-
    Wireless Buzzer
    		Wireless door lock buzzer
    		ON/OFF
    		-
    Door Lock
    		Door lock motor
    		LOCK/UNLOCK
    		-