Rear Door Speaker Installation


  1. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 14 Speakers)

  2. INSTALL REAR SPEAKER SET

  3. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP LH

  4. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

  5. INSTALL ASSIST GRIP COVER LH

  6. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Rear Door Speaker -- Installation


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 14 Speakers)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Audio Video.Audio And Visual System (For Radio Receiver Type).Rear Door Speaker Installation

  1. Align the speaker with the door position pins labeled A.

  1. Install the rear No. 2 speaker with the 2 screws.

    NOTICE:
    Do not touch the cone of the speaker.


2. INSTALL REAR SPEAKER SET


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Audio Video.Audio And Visual System (For Radio Receiver Type).Rear Door Speaker Installation

  1. Temporarily install the speaker by attaching the 2 claws of the speaker to the door panel.

  1. Install the rear speaker set with the 3 screws in the order shown in the illustration.

    NOTICE:
    Do not touch the cone of the speaker.

  1. Connect the connector.



3. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Attach the 3 claws to install the rear door inner glass weatherstrip as shown in the illustration.



4. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Install the clamp to the door panel.

  1. Connect the rear door lock remote control cable assembly and rear door inside locking cable assembly.

  1. Connect each connector.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Attach the rear door trim board sub-assembly by attaching the 4 claws of the rear door inner glass weatherstrip as shown in the illustration.

  1. Attach the 9 clips and install the rear door trim board sub-assembly.

  1. Install the 3 screws.



5. INSTALL ASSIST GRIP COVER LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Attach the 8 claws to install the assist grip cover.



6. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Attach the 3 claws to install the door inside handle bezel.



7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).