Air Conditioning System (For Automatic Air Conditioning System) Diagnosis System

  1. DESCRIPTION

  1. CHECK DLC3

  1. LIST OF OPERATION METHODS

  1. INDICATOR CHECK

  1. DTC CHECK (SENSOR CHECK)

Air Conditioning System (For Automatic Air Conditioning System) -- Diagnosis System



DESCRIPTION

  1. Air conditioning system data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the intelligent tester to check for malfunctions and perform troubleshooting.


CHECK DLC3

  1. Check the DLC3 (LandCruiser RM000003YMH00MX.html).


LIST OF OPERATION METHODS


  1. By operating each of the air conditioning control switches as shown in the diagram below, it is possible to enter diagnostic check mode.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Air Conditioning System (For Automatic Air Conditioning System) Diagnosis System


INDICATOR CHECK
Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Air Conditioning System (For Automatic Air Conditioning System) Diagnosis System

  1. Turn the ignition switch off.

  2. Turn the ignition switch to ACC and wait at least 5 seconds.

  3. Press and hold the air conditioning control "AUTO" switch and "recirculation/fresh" switch simultaneously, and turn the ignition switch to ON. Continue holding the 2 switches until panel diagnosis mode begins.



    4. Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Air Conditioning System (For Automatic Air Conditioning System) Diagnosis System

  4. Check that all indicators turn on and off 4 times in succession at 1 second intervals.

    HINT:
    1. After the indicator check is completed, the system enters DTC check mode automatically.
    2. Press the "OFF" switch to cancel the check mode.

DTC CHECK (SENSOR CHECK)
Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Air Conditioning System (For Automatic Air Conditioning System) Diagnosis System

  1. Start the engine and warm it up.

  2. Perform the indicator check.

    HINT:
    After the indicator check is completed, the system enters DTC check mode automatically.

  3. Read the code displayed on the panel.

    NOTICE:
    In sensor check mode, which is automatically entered after indicator check mode, troubleshooting may be only partially completed.
    HINT:
    Refer to the Diagnostic Trouble Code Chart for details of the codes (LandCruiser RM000002LIN06CX.html).
    1. When there are no problems, DTC 00 is output.
    2. As an example, the illustration shows that DTC 23 is output.

  4. If the codes are difficult to read because they change automatically, operate the driver temperature up switch to display the codes one at a time so that they can be read easily. The items are displayed one by one each time the driver temperature up switch is operated.

    HINT:
    Push the "OFF" switch to finish panel diagnosis.