Front Seat Outer Belt Assembly (For 3 Door) Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE DOOR SCUFF PLATE ASSEMBLY LH

  3. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

  4. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  5. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

  6. REMOVE QUARTER TRIM COVER HOLE LH

  7. REMOVE REAR FLOOR CARPET ASSEMBLY

  8. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

  9. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ o Tonneau Cover)

  10. REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

  11. REMOVE OUTER LAP BELT ANCHOR COVER

  12. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

  13. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

  14. REMOVE FRONT SEAT OUTER BELT ASSEMBLY

  15. REMOVE FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY

Front Seat Outer Belt Assembly (For 3 Door) -- Removal


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


2. REMOVE DOOR SCUFF PLATE ASSEMBLY LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat Belt.Seat Belt Warning System.Front Seat Outer Belt Assembly (For 3 Door) Removal

  1. Put protective tape around the door scuff plate.

  1. Using a screwdriver, detach the 4 clips, 10 claws and 2 guides and remove the door scuff plate.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


3. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

  1. Partially remove the front door opening trim weatherstrip so that the lower center pillar garnish and center pillar garnish can be removed (LandCruiser RM0000046JL02NX_01_0005.html).



4. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  1. Remove the tonneau cover.



5. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 5 screws.

  1. Detach the 6 claws and remove the rear floor mat rear support plate.



6. REMOVE QUARTER TRIM COVER HOLE LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 2 claws and 2 guides and remove the quarter trim cover hole.



7. REMOVE REAR FLOOR CARPET ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the rear floor carpet.



8. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
HINT:
Use the same procedure for the other No. 1 luggage compartment trim hook.

  1. Remove the luggage compartment trim hook by turning it clockwise.



9. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ o Tonneau Cover)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat Belt.Seat Belt Warning System.Front Seat Outer Belt Assembly (For 3 Door) Removal
HINT:
Use the same procedure for the other tonneau cover holder cap.

  1. Using a screwdriver, detach the 2 claws and remove the tonneau cover holder cap.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective tape


10. REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat Belt.Seat Belt Warning System.Front Seat Outer Belt Assembly (For 3 Door) Removal
HINT:
Use the same procedure for the other front deck side trim cover.

  1. Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective tape


11. REMOVE OUTER LAP BELT ANCHOR COVER


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
HINT:
Use the same procedure for the other outer lap belt anchor cover.

  1. Detach the 3 claws and remove the outer lap belt anchor cover.



12. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the bolt and disconnect the front seat outer belt floor anchor.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

  1. Remove the 3 bolts and 2 screws.



  1. Detach the 9 claws and 12 clips and remove the deck trim side panel.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat Belt.Seat Belt Warning System.Front Seat Outer Belt Assembly (For 3 Door) Removal



13. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Move the front shoulder belt anchor adjuster to the lowest position.

  1. Remove the bolt.

  1. Detach the 2 clips and 2 guides.

  1. Pass the front seat outer belt floor anchor through the front quarter trim panel and remove the front quarter trim panel.



14. REMOVE FRONT SEAT OUTER BELT ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the nut and shoulder anchor.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat Belt.Seat Belt Warning System.Front Seat Outer Belt Assembly (For 3 Door) Removal

  1. Disconnect the pretensioner connector labeled A as shown in the illustration.

  1. w/ Pre-Crash Safety System:
    Disconnect the pre-crash safety connector labeled B.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the bolt and seat belt.



15. REMOVE FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 bolts and anchor plate.