Rear Lower Arm Installation


  1. TEMPORARILY INSTALL LOWER CONTROL ARM ASSEMBLY LH

  2. CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY

  3. INSTALL REAR WHEEL

  4. STABILIZE SUSPENSION

  5. TIGHTEN LOWER CONTROL ARM ASSEMBLY LH

Rear Lower Arm -- Installation


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.
  3. A bolt without a torque specification is shown in the standard bolt chart (LandCruiser RM00000118W0G8X.html).


1. TEMPORARILY INSTALL LOWER CONTROL ARM ASSEMBLY LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Rear Suspension.Rear Suspension System.Rear Lower Arm Installation

  1. Temporarily install the lower control arm assembly with the bolt and nut.

    Text in Illustration
    *a
    		Front
    *b
    		Outer Side
    HINT:
    Install the lower control arm assembly as shown in the illustration.

  1. Temporarily install the lower control arm assembly to the rear axle housing with the nut and bolt.



2. CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY

  1. Connect the No. 3 parking brake cable assembly with the bolt.

    Torque:
    13 N*m{127 kgf*cm, 9 ft.*lbf}


3. INSTALL REAR WHEEL
Torque:
for Aluminum Wheel:
103 N*m{1050 kgf*cm, 76 ft.*lbf}
for Steel Wheel:
112 N*m{1137 kgf*cm, 82 ft.*lbf}


4. STABILIZE SUSPENSION

  1. Lower the vehicle.

  1. Bounce the vehicle up and down several times to stabilize the suspension.



5. TIGHTEN LOWER CONTROL ARM ASSEMBLY LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Rear Suspension.Rear Suspension System.Rear Lower Arm Installation

  1. Tighten the 2 bolts.

    Torque:
    130 N*m{1326 kgf*cm, 96 ft.*lbf}
    HINT:
    While holding the nut, turn the bolt.