Suspension Control Ecu Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD)

  3. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)

  4. REMOVE SUSPENSION CONTROL ECU

Suspension Control Ecu -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD)
(LandCruiser RM000003YPV037X.html)


3. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)
(LandCruiser RM0000046J800OX.html)


4. REMOVE SUSPENSION CONTROL ECU


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the 3 connectors.

  1. Remove the 2 bolts and suspension control ECU.

    NOTICE:
    Replace the suspension control ECU with a new one if it is dropped.