Height Control Dryer Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE REAR WHEEL LH

  3. REMOVE REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY LH

  4. REMOVE HEIGHT CONTROL COMPRESSOR COVER

  5. REMOVE REAR BUMPER PROTECTOR SUB-ASSEMBLY LH (for 5 Door)

  6. REMOVE HEIGHT CONTROL FILTER

  7. DISCONNECT NO. 2 HEIGHT CONTROL TUBE

  8. REMOVE HEIGHT CONTROL COMPRESSOR ASSEMBLY

  9. REMOVE HEIGHT CONTROL DRYER ASSEMBLY

Height Control Dryer -- Removal


NOTICE:
Before removal, Be sure to disable vehicle height control by pressing the height control OFF switch and confirming that the height control OFF indication is displayed on the meter.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


2. REMOVE REAR WHEEL LH


3. REMOVE REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 clips and 5 screws.

  1. Remove the rear quarter panel mudguard.



4. REMOVE HEIGHT CONTROL COMPRESSOR COVER

  1. Remove the 3 clips and height control compressor cover.



5. REMOVE REAR BUMPER PROTECTOR SUB-ASSEMBLY LH (for 5 Door)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Suspension Control.Air Suspension System.Height Control Dryer Removal

  1. Remove the screw.

  1. Detach the guide and remove the rear bumper protector.

    Text in Illustration
    *1
    		Guide


6. REMOVE HEIGHT CONTROL FILTER

  1. Slide the 2 clips and disconnect the 2 hoses.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 bolts and height control filter from the height control compressor bracket.



7. DISCONNECT NO. 2 HEIGHT CONTROL TUBE


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the No. 2 height control tube from the No. 2 height control valve (LandCruiser RM000001U54015X.html).

    HINT:
    For the disconnection procedure of the tube (type 2), refer to Precaution of the Suspension Control System section.


8. REMOVE HEIGHT CONTROL COMPRESSOR ASSEMBLY

  1. Disconnect the connector.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 3 clamps.

  1. Detach the No. 2 height control tube.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the connector.

  1. Detach the clamp.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 3 bolts and height control compressor.



9. REMOVE HEIGHT CONTROL DRYER ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the No. 2 height control tube (LandCruiser RM000001U54015X.html).

    HINT:
    For the disconnection procedure of the tube (type 2), refer to Precaution of the Suspension Control System section.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the bolt and height control dryer from the height control compressor.

  1. Remove the O-ring.