Radiator -- Removal |
| 1. REMOVE UPPER RADIATOR SUPPORT SEAL |
Remove the 13 clips and upper radiator support seal.
| 2. REMOVE FRONT BUMPER COVER LOWER |
Remove the clip, 5 bolts and front bumper cover lower.
| 3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY |
Remove the 4 bolts.
Unhook the engine under cover from the vehicle body as shown in the illustration.
 |
| 4. DRAIN ENGINE COOLANT |
- CAUTION:
- Do not remove the radiator cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.
| *1 | Reservoir Cap | *2 | Radiator Cap |
| *3 | Radiator Drain Cock Plug | *4 | Cylinder Block Drain Cock Plug |
Loosen the radiator drain cock plug.
Remove the radiator cap and drain the coolant.
- HINT:
- Collect the coolant in a container and dispose of it according to the regulations in your area.
Loosen the cylinder block drain cock plug and drain the coolant from the engine.
| 5. REMOVE V-BANK COVER |
Raise the front of the V-bank cover to detach the 2 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.
Text in Illustration *1 Pin *2 Hook
 |
| 6. REMOVE FRONT BUMPER COVER |
Remove the front bumper cover (LandCruiser RM0000038JX027X.html).
| 7. REMOVE UPPER FRONT BUMPER RETAINER |
Remove the 3 bolts and retainer.
 |
| 8. REMOVE RADIATOR SIDE DEFLECTOR RH |
Using a clip remover, detach the 3 claws and remove the clip. Then move the side deflector so that the radiator can be removed in the step below.
 |
| 9. REMOVE RADIATOR SIDE DEFLECTOR LH |
Using a clip remover, detach the 3 claws and remove the clip. Then move the side deflector so that the radiator can be removed in the step below.
 |
| 10. REMOVE NO. 1 RADIATOR HOSE |
 |
| 11. REMOVE NO. 2 RADIATOR HOSE |
Disconnect the radiator hose from the water inlet.
 |
Detach the clamp and remove the radiator hose.
 |
| 12. REMOVE RADIATOR RESERVOIR |
Disconnect the reservoir hose from the upper side of the radiator tank.
 |
Remove the 3 bolts and radiator reservoir.
| 13. DISCONNECT OIL COOLER TUBE (w/ Warmer) |
Detach the claw to open the flexible hose clamp, and then remove the 2 bolts to disconnect the oil cooler tube from the fan shroud.
 |
| 14. DISCONNECT OIL COOLER TUBE (w/ Air Cooled Transmission Oil Cooler) |
Detach the claw to open the flexible hose clamp, and then remove the 2 bolts to disconnect the oil cooler tube from the fan shroud.
 |
| 15. REMOVE FAN SHROUD |
Loosen the 4 nuts holding the fluid coupling fan.
 |
Remove the fan and generator V-belt (LandCruiser RM0000017LA01RX.html).
Remove the 2 bolts holding the fan shroud.
 |
Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the coupling fan.
- NOTICE:
- Be careful not to damage the radiator core.
Remove the fan pulley from the water pump.
| 16. REMOVE RADIATOR ASSEMBLY |
for Automatic Transmission:
Disconnect the 2 oil cooler hoses.Text in Illustration *A w/ Warmer *B w/ Air Cooled Transmission Oil Cooler
 |
Remove the 4 bolts and radiator.
 |
| 17. REMOVE NO. 1 RADIATOR TO SUPPORT SEAL |
Remove the seal from the radiator assembly.
| 18. REMOVE NO. 2 RADIATOR TO SUPPORT SEAL |
Remove the seal from the radiator assembly.