Rear View Monitor System (For Radio And Display Type) Image From Camera For Rear View Monitor Is Abnormal


DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - REAR TELEVISION CAMERA ASSEMBLY)

CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY

CHECK REAR TELEVISION CAMERA ASSEMBLY

REAR VIEW MONITOR SYSTEM (for Radio and Display Type) - Image from Camera for Rear View Monitor is Abnormal


DESCRIPTION

This is the display signal circuit between the radio and display receiver assembly and the rear television camera assembly.

WIRING DIAGRAM


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Park Assist Monitoring.Toyota Parking Assist-Sensor System (W/ Multi-Display).Rear View Monitor System (For Radio And Display Type) Image From Camera For Rear View Monitor Is Abnormal


INSPECTION PROCEDURE

1.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - REAR TELEVISION CAMERA ASSEMBLY)

  1. Disconnect the H50 radio and display receiver assembly connector.

  1. Disconnect the X9*1 or v2*2 rear television camera assembly connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    w/ Tire Carrier:
    Tester Connection
    		Condition
    		Specified Condition
    H50-11 (CA+) - X9-6 (CB+)
    		Always
    		Below 1 Ω
    H50-12 (V+) - X9-3 (CV+)
    		Always
    		Below 1 Ω
    H50-23 (CGND) - X9-5 (CGND)
    		Always
    		Below 1 Ω
    H50-24 (V-) - X9-2 (CV-)
    		Always
    		Below 1 Ω
    H50-11 (CA+) - Body ground
    		Always
    		10 kΩ or higher
    H50-12 (V+) - Body ground
    		Always
    		10 kΩ or higher
    H50-23 (CGND) - Body ground
    		Always
    		10 kΩ or higher
    H50-24 (V-) - Body ground
    		Always
    		10 kΩ or higher
    w/o Tire Carrier:
    Tester Connection
    		Condition
    		Specified Condition
    H50-11 (CA+) - v2-6 (CB+)
    		Always
    		Below 1 Ω
    H50-12 (V+) - v2-3 (CV+)
    		Always
    		Below 1 Ω
    H50-23 (CGND) - v2-5 (CGND)
    		Always
    		Below 1 Ω
    H50-24 (V-) - v2-2 (CV-)
    		Always
    		Below 1 Ω
    H50-11 (CA+) - Body ground
    		Always
    		10 kΩ or higher
    H50-12 (V+) - Body ground
    		Always
    		10 kΩ or higher
    H50-23 (CGND) - Body ground
    		Always
    		10 kΩ or higher
    H50-24 (V-) - Body ground
    		Always
    		10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


2.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Park Assist Monitoring.Toyota Parking Assist-Sensor System (W/ Multi-Display).Rear View Monitor System (For Radio And Display Type) Image From Camera For Rear View Monitor Is Abnormal

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    H50-23 (CGND) - Body ground
    		Always
    		Below 1 Ω
    H50-24 (V-) - Body ground
    		Always
    		Below 1 Ω

  1. Measure the voltage according to the value(s) in the table below.

    Standard Voltage:
    Tester Connection
    		Switch Condition
    		Specified Condition
    H50-11 (CA+) - Body ground
    		Ignition switch ON
    		5.5 to 7.05 V
Text in Illustration
*a
Component with harness connected
(Radio and Display Receiver Assembly)
Result
Result
Proceed to
OK
A
NG (w/ Navigation System)
B
NG (w/o Navigation System)
C


B
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (LandCruiser RM000003B6H02GX.html)

C
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (LandCruiser RM000003AHY02NX.html)
A


3.CHECK REAR TELEVISION CAMERA ASSEMBLY


  1. Using an oscilloscope, check the waveform.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Park Assist Monitoring.Toyota Parking Assist-Sensor System (W/ Multi-Display).Rear View Monitor System (For Radio And Display Type) Image From Camera For Rear View Monitor Is Abnormal


    Text in Illustration
    *a
    		Component with harness connected
    (Radio and Display Receiver Assembly)
    		*b
    		Waveform 1
    *c
    		Waveform 2
    		*d
    		Synchronized Signal
    *e
    		Video Waveform
    		-
    		-
    Measurement Condition
    Item
    		Content
    Tester Connection
    		H50-12 (V+) - H50-23 (CGND)
    Tool Setting
    		200 mV/DIV., 50 μs/DIV.
    Condition
    1. Waveform 1: Ignition switch ON, camera lens not covered, displaying an image
    2. Waveform 2: Ignition switch ON, camera lens covered, blacking out screen
    OK:
    Waveform is as shown in illustration.
    HINT:
    The video waveform changes according to the image sent by the rear television camera assembly.
    Result
    Result
    		Proceed to
    OK
    		A
    NG (w/ Tire Carrier)
    		B
    NG (w/o Tire Carrier)
    		C


B
REPLACE REAR TELEVISION CAMERA ASSEMBLY (LandCruiser RM00000470U00MX.html)

C
REPLACE REAR TELEVISION CAMERA ASSEMBLY (LandCruiser RM00000470U00MX.html)
A

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (LandCruiser RM000005MCN00CX.html)