Downhill Assist Control Switch Inspection
CHECK SUSPENSION CONTROL SWITCH (DOWNHILL ASSIST CONTROL SWITCH)
Downhill Assist Control Switch -- Inspection |
1. CHECK SUSPENSION CONTROL SWITCH (DOWNHILL ASSIST CONTROL SWITCH) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Switch Condition
| Specified Condition
|
1 - 4
| Pressed
| Below 1 Ω
|
Not pressed
| 10 kΩ or higher
|
Text in Illustration*a
| Component without harness connected (Downhill Assist Control Switch)
|
If the result is not as specified, replace the suspension control switch.