Steering Lock System System Description

  1. DESCRIPTION

  1. FUNCTIONS OF COMPONENTS

  1. WARNING FUNCTION OF ENGINE SWITCH INDICATOR

Steering Lock System -- System Description



DESCRIPTION

  1. The steering lock system locks or unlocks the steering by activating the steering lock bar with a motor. The steering lock ECU activates the motor based on signals from the certification ECU and power management control ECU.

  2. A Local Interconnect Network (LIN) is used for communication between different ECUs in this system.


FUNCTIONS OF COMPONENTS

  1. The steering lock ECU controls the system based on information from the following components:

    Item
    		Function
    Steering lock actuator assembly
    		Consists of a motor, lock bar, lock and unlock position sensors, etc. activated by the steering lock ECU.
    Steering lock ECU
    1. Included in the steering lock actuator assembly. This ECU activates the steering lock motor based on permission signals from the certification ECU.
    2. Records ECU verification codes.
    Power management control ECU
    1. Permits the steering lock ECU to supply power to activate the motor.
    2. Performs power supply switching control.
    3. Controls the engine switch indicator.
    4. Operates the IG2 relay.
    Certification ECU
    1. Performs key verification (checks whether the correct key is present).
    2. Controls the security indicator and the illumination of the lettering on the engine switch.
    3. Records ECU verification codes.
    IG2 relay
    		Controlled by the power management control ECU. Signals indicating the on/off status of this relay are sent to the power management control ECU and steering lock ECU.
    ID code box
    1. Transmits a command to set or cancel the immobiliser to the ECM based on permission signals from the certification ECU.
    2. Records ECU verification codes.

WARNING FUNCTION OF ENGINE SWITCH INDICATOR
Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Steering Column.Power Tilt And Power Telescopic Steering Column System.Steering Lock System System Description
Text in Illustration
*1
Indicator Light

  1. The power management control ECU blinks the indicator light LED of the engine switch when any of the following problems occur in the system.

    Detection Item
    		Indicator Blink Pattern
    		Indication Status
    		Countermeasure
    Steering lock release malfunction
    1. Blinks in green at 1-second intervals
    2. Goes off 30 seconds after blinking starts
    		Motor operates to release steering lock, but steering lock cannot be released (lock bar stuck in steering column).
    		Push engine switch while turning steering wheel to right and left
    Malfunction in push button start function
    1. Blinks in amber at 2-second intervals
    2. Goes off 15 seconds after blinking starts
    1. Short in devices for activating motor
    2. Problem in steering lock ECU or power management control ECU
    		Troubleshoot by following "How to Proceed with Troubleshooting" (LandCruiser RM000001T1306UX.html)