Front Wiper Motor Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE UPPER RADIATOR SUPPORT SEAL

  3. REMOVE FRONT FENDER SIDE PANEL PROTECTOR LH

  4. REMOVE FRONT FENDER SIDE PANEL PROTECTOR RH

  5. REMOVE FRONT FENDER TO COWL SIDE SEAL LH

  6. REMOVE FRONT FENDER TO COWL SIDE SEAL RH

  7. REMOVE WINDSHIELD WIPER ARM COVER

  8. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

  9. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

  10. REMOVE HOOD TO COWL TOP SEAL

  11. REMOVE CENTER NO. 2 COWL TOP VENTILATOR LOUVER

  12. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

  13. REMOVE WINDSHIELD WIPER MOTOR AND LINK

  14. REMOVE FRONT WIPER CRANK SUB-ASSEMBLY (for RHD, w/ Spring)

  15. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY

  16. REMOVE WIPER MOTOR WIRE

Front Wiper Motor -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


2. REMOVE UPPER RADIATOR SUPPORT SEAL

  1. Remove the 13 clips and upper radiator support seal.



3. REMOVE FRONT FENDER SIDE PANEL PROTECTOR LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 3 clips and guide, and remove the front fender side panel protector.



4. REMOVE FRONT FENDER SIDE PANEL PROTECTOR RH
HINT:
Use the same procedure for the RH side and LH side.


5. REMOVE FRONT FENDER TO COWL SIDE SEAL LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 5 claws and remove the front fender to cowl side seal LH.



6. REMOVE FRONT FENDER TO COWL SIDE SEAL RH
HINT:
Use the same procedure for the RH side and LH side.


7. REMOVE WINDSHIELD WIPER ARM COVER


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Wiper Washer.Wiper And Washer System.Front Wiper Motor Removal

  1. Using a screwdriver, detach the 3 claws and remove the wiper arm cover.

    Text in Illustration
    *1
    		Protective Tape
    HINT:
    1. Tape the screwdriver tip before use.
    2. Use the same procedure for the RH and LH sides.


8. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the nut and front wiper arm and blade assembly LH.



9. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the nut and front wiper arm and blade assembly RH.



10. REMOVE HOOD TO COWL TOP SEAL


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 7 claws and 2 clips and remove the hood to cowl top seal.



11. REMOVE CENTER NO. 2 COWL TOP VENTILATOR LOUVER


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 2 claws and 3 guides and remove the center No. 2 cowl top ventilator louver.



12. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Wiper Washer.Wiper And Washer System.Front Wiper Motor Removal

  1. Remove the 2 clips.

  1. Detach the 6 claws and guide (A).

    Text in Illustration
    *1
    		Guide A
    *2
    		Guide B

  1. Disengage the 10 guides (B) and pull out the cowl top ventilator louver sub-assembly.



13. REMOVE WINDSHIELD WIPER MOTOR AND LINK


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the clamp and disconnect the connector.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 bolts.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Wiper Washer.Wiper And Washer System.Front Wiper Motor Removal

  1. Detach the grommet and remove the windshield wiper motor and link as shown in the illustration.

    Text in Illustration
    *1
    		Grommet
    NOTICE:
    Be careful not to damage the windshield when removing the windshield wiper motor and link assembly.


14. REMOVE FRONT WIPER CRANK SUB-ASSEMBLY (for RHD, w/ Spring)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Wiper Washer.Wiper And Washer System.Front Wiper Motor Removal

  1. Using a screwdriver, separate the windshield wiper link rod from the crank arm pivot of the front wiper crank sub-assembly as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the nut and front wiper crank sub-assembly.



15. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY


  1. w/o Spring:



      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Wiper Washer.Wiper And Washer System.Front Wiper Motor Removal

    1. Using a screwdriver, separate the windshield wiper link rod from the crank arm pivot of the front wiper crank as shown in the illustration.

      Text in Illustration
      *1
      		Protective Tape
      HINT:
      Tape the screwdriver tip before use.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the connector.

  1. Using a T30 ''TORX'' socket, remove the 2 bolts and windshield wiper motor.



16. REMOVE WIPER MOTOR WIRE


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the claw and remove the wiper motor wire.