Parking Brake Assembly Disassembly
REMOVE REAR WHEEL LH
DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH
REMOVE REAR DISC
REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING
DISCONNECT NO. 1 PARKING BRAKE SHOE ASSEMBLY LH
REMOVE PARKING BRAKE SHOE STRUT LH
DISCONNECT NO. 2 PARKING BRAKE SHOE ASSEMBLY LH
REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET
REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY LH
REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING
REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER
REMOVE PARKING BRAKE SHOE LEVER LH
REMOVE PARKING BRAKE SHOE HOLD DOWN SPRING PIN
Parking Brake Assembly -- Disassembly |
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
2. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH |
Remove the 2 bolts and disconnect the rear disc brake cylinder.
- NOTICE:
- Do not disconnect the flexible hose from the disc brake cylinder.
- Do not twist or bend the flexible hose.
Hang the disc brake cylinder with a piece of wire.
Put matchmarks on the rear disc and axle hub if planning to reuse the disc.
Text in Illustration*1
| Matchmark
|
Turn the shoe adjuster until the disc turns freely, and then remove the disc.
Text in Illustration
| Shoe Adjuster Contracts
|

| Shoe Adjuster Expands
|
4. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING |
Remove the 2 parking brake shoe return tension springs.
5. DISCONNECT NO. 1 PARKING BRAKE SHOE ASSEMBLY LH |
Remove the parking brake shoe hold down spring cups and parking brake shoe hold down spring to disconnect the No. 1 parking brake shoe assembly from the backing plate.
6. REMOVE PARKING BRAKE SHOE STRUT LH |
Remove the parking brake shoe strut and parking brake shoe strut compression spring.
7. DISCONNECT NO. 2 PARKING BRAKE SHOE ASSEMBLY LH |
Remove the parking brake shoe hold down spring cup and parking brake shoe hold down spring to disconnect the No. 2 parking brake shoe assembly from the backing plate.
8. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET |
Remove the parking brake shoe adjusting screw set.
9. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY LH |
Disconnect the parking brake shoe return tension spring to remove the No. 1 parking brake shoe assembly.
10. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING |
Remove the parking brake shoe return tension spring from the No. 2 parking brake shoe assembly.
11. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER |
Using needle-nose pliers, disconnect the No. 3 parking brake cable assembly from the parking brake shoe lever as shown in the illustration.
- NOTICE:
- Be careful not to damage the No. 3 parking brake cable assembly.
12. REMOVE PARKING BRAKE SHOE LEVER LH |
Remove the C-washer, shim and parking brake shoe lever from the No. 2 parking brake shoe assembly as shown in the illustration.
13. REMOVE PARKING BRAKE SHOE HOLD DOWN SPRING PIN |
Remove the parking brake shoe hold down spring pin (for front side).
Remove the parking brake shoe hold down spring pin (for rear side).