Dtc P0606 Ecm / Pcm Processor


DESCRIPTION

INSPECTION PROCEDURE

REPLACE ECM

CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED

DTC P0606 ECM / PCM Processor

DTC P060A Internal Control Module Monitoring Processor Performance

DTC P060B Internal Control Module A/D Processing Performance

DTC P1607 Cruise Control Input Processor


DESCRIPTION


P0606, P060A, P060B, P1607
DTC Detection Drive Pattern
DTC Detection Condition
Trouble Area
Ignition switch ON for 1 second
ECM internal error continues for 1 second (1 trip detection logic).
ECM

INSPECTION PROCEDURE

NOTICE:
After replacing the ECM, the new ECM needs registration (LandCruiser RM0000012XK0ARX.html) and initialization (LandCruiser RM000000TIN08CX.html).
1.REPLACE ECM

  1. Replace the ECM (LandCruiser RM0000013Z002CX.html).


NEXT


2.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED

  1. Connect the intelligent tester to the DLC3.

  1. Clear the DTCs (LandCruiser RM000000PDK1DJX.html).

  1. Turn the ignition switch off for 30 seconds or more.

  1. Turn the ignition switch to ON for 1 second.

  1. Enter the following menus: Powertrain / Engine and ECT / DTC.

  1. Confirm that the DTC is not output again.


NEXT

END