Starter (For 2.0 Kw Type) Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE REAR ENGINE UNDER COVER ASSEMBLY

  3. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY (for Manual Transmission)

  4. REMOVE STARTER ASSEMBLY

Starter (For 2.0 Kw Type) -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


2. REMOVE REAR ENGINE UNDER COVER ASSEMBLY

  1. Remove the 4 bolts and rear engine under cover assembly.



3. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY (for Manual Transmission)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 bolts and disconnect the release cylinder assembly.



4. REMOVE STARTER ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the terminal cap.

  1. Remove the nut, and then disconnect the starter wire harness.

  1. Disconnect the starter connector.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. for Automatic Transmission:
    Remove the 2 bolts and starter assembly.



  1. for Manual Transmission:



      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.2Tr-Fe Starting.Starting System.Starter (For 2.0 Kw Type) Removal

    1. Remove the bolt and disconnect the clutch flexible hose bracket.

      Text in Illustration
      *1
      		Clutch Flexible Hose Bracket

    2. Remove the bolt and starter assembly.